Is your lock protected? How do you use a hardware lock properly? Learning how to maintain your lock can significantly extend its lifespan and ensure it works smoothly for years.
First, make sure the internal moving parts of the lock are well-lubricated with a long-lasting lubricant. It's also a good idea to perform a thorough inspection every six months to check for any loosening or wear, which can help prevent future issues and prolong the lock’s life.
Second, if you notice any stiffness when inserting or removing the key, try sprinkling a small amount of graphite powder or even pencil dust into the keyhole. This can help reduce friction and allow the key to turn more smoothly and safely.
Third, regularly check the alignment between the lock body and the strike plate. Make sure the latch and the hole on the door frame match correctly. Proper clearance between the door and the frame, as well as between the lock components, is essential for smooth operation and long-term performance.
When it comes to the appearance and maintenance of the lock, there are two important points to consider. First, during installation or renovation, avoid touching the lock’s surface with adhesive tape or any materials that might leave residue. Also, protect the exposed parts like the handle and panel with a sealant to prevent damage from acidic or alkaline substances that may appear during painting or construction. These substances can cause discoloration, blistering, or even peeling of the finish. Regular waxing can help maintain the lock's appearance and prevent such issues.
Second, during normal use, if dirt or grime builds up, wipe it off with a dry cloth. Avoid using harsh chemicals or abrasive materials. For metal locks, be cautious not to let moisture sit, as it can cause rust. For alloy locks, avoid scrubbing too hard, as this can wear away the protective coating and affect the lock’s original look. A simple damp cloth is usually enough for cleaning.
Zonglan Hand Tools for eyelets consist of piercing and attaching hand toolsets.
This manual set is designed to be used with a hide face mallet. It is good for piercing material and attaching curtain eyelets afterward. Not all hand tools are the same and it is not easy to find such a highly qualified hand tool for attaching curtain eyelets in today`s world.
Though these tools are designed for low-volume eyelet application projects, Zonglan Hand Tools are professionally designed and produced with advanced technology for decades of problem-free use. Zonglan Hand Tools are made of Stainless Steel to increase their resistance to oxidation. Their surface is specially treated for metal hardening for stronger durability against harsh hammer usage.
Zonglan Hand Tools are designed in such a manner affording the use of minimum force with maximum comfort. In addition, thanks to its precision, the eyelet application quality of Zonglan Hand Tools is far better than the application quality of its ordinary competitors.
Our hand tools sets are available for 6mm,10mm and 12mm Easy Apply Zonglan eyelets and are suitable to attach them onto various substrates, including tarpaulin, drapery and home textile.
Eyelet Dies,Grommet Machine Dies,Eyelet Flaring Die,Eyelet Press Dies
NINGBO ZONGLAN MECHANICAL AND ELECTRICAL EQUIPMENT MANUFACTURE CO., LTD , https://www.zonglaneyelet.com