Low temperature rain and snow south of the Huaihe River, facilities agriculture must be protected

Affected by cold and warm air, in the next three days, there will be small to medium snow (rain) or sleet in the eastern part of the Qinghai-Tibet Plateau, northern Xinjiang, northeastern Inner Mongolia, north-central northeast, northwestern central and eastern part of Huanghuai. Among them, there are heavy snow in parts of southeastern Hubei, southern Susong, northeastern Jiangnan and central Hunan, and there are heavy snow in the southern part of Anhui Province and northwestern Zhejiang. There are freezing rains in the central and western parts of Guizhou and northeastern Yunnan. .

It is expected that from January 26th to 28th, large areas of low-temperature rain and snow will occur in most areas south of the Huaihe River in China, including Guizhou, Chongqing, western and northern Hunan, southern Hubei, central and southern Anhui, central and southern Jiangsu, and northern Zhejiang. In some areas, there will be heavy snow, local blizzards, and there will be freezing rain in Guizhou and northeastern Yunnan; some areas in western China and southern Huanghuai will have weak precipitation processes, which will be beneficial to improving soil moisture. On the 29th, the rain and snow in the south will be significantly weakened. On the 30th, the temperature in the south will begin to rise.

For cold weather, crops should pay attention to the application of grass ash or decomposed finely divided organic fertilizer to increase the ground temperature. Facility agriculture should increase the cover of straw curtains and quilts in time to prevent freezing, prevent low temperature from invading greenhouse crops. During the cooling period, according to the weather conditions, the curtains should be properly delayed in the morning, and the curtains should be covered in advance in the afternoon to prevent the loss caused by low temperature. Existing greenhouses or greenhouses are reinforced, and membranes and laminating strips are repaired in time to prevent damage to greenhouses or greenhouses due to windy weather.

In addition, after the weather has cooled down, the field management will be strengthened, and the foliar fertilizer will be actively pursued to promote the recovery and growth of the plants.

Total 1 | <First <Prev 1 Next> Last> |

share to:

40W Glue Guns Features:

1. Versatile

2. Easy

3. Quick

4. Proective Nozzle Cover

5. Trigger Flow Control

6. Bonds instantly

7. High quality

8. High temperature or low temperature

9. New design

10. With switch function

11. Big power

12. Industrial use

Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.

Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.

General Safety Information:

1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;

2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;

3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;

4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;

If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;

If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.

5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;

6. Do not touch the nozzle or melted glue;

7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.

8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;

9. Keep out of reach of children and stocked it beyond any of Children palpable side;

10. Only used for melting glue stick, no other usage;

11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;

12. Close the power if the glue gun not in use after 15 minutes;

Using methods

1. Glue gun using voltage is 110-220V AC,50/60Hz;

2. Tip gun forward on stand and place a piece of cardboard under the nozzle

3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun

4. After power, wait for 5-10 minutes to allow glue to soften

After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plug

Professional Glue Gun

Professional Glue Gun, 40W Glue Guns, Silicone Glue Gun, Hot Melt Glue Gun

Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com