Laser cutting products are fast and of good quality

Nowadays laser cutting can not only provide processing services for various products with high precision requirements, but also provide batch product processing, etc., because we know that laser cutting products are fast and of good quality, no matter what environment Under-cutting and cutting of plates can ensure the quality of products, and also provide a good operating environment for the operators of the manufacturers. The emergence of such processing has also replaced some of the mechanical processing and has become an "important role" in the processing industry.

One-stop service from processing equipment shell to laser cutting!

Laser cutting can undertake laser cutting processing services of various materials. Now laser cutting can not only provide processing services for stainless steel plates with different thicknesses, but also provide processing services for metal plates of other materials, as well as cutting of non-metallic materials such as acrylic machining.

Due to the physical gas bottle or large-scale workers in gas welding and flame cutting technology, the gas and oxygen or air are mixed in the torch, the temperature of the generated flame is enough to fuse the relevant surface, or the cutting metal is sufficient to produce Melted oxide.

Main: laser cutting, CNC flame cutting, sheet metal shearing and folding, turning and milling drilling machines, welding processing, etc.

When cutting steel parts, the cutting efficiency is increased by 8 ~ 20 times, the heat affected zone is extremely small, the workpiece deformation is minimal, the cutting edge roughness is extremely small, no further finishing is required, no lumps are generated after cutting, no burrs and slitting Narrow and constant dimensions can achieve tight fit tolerances.

Laser cutting can process not only different types of materials, but also materials with different thicknesses from thin to thick plates.

The high power density of the laser beam in the cutting process makes the material being cut quickly heated, melted, or even partially or completely evaporated. The quality of the cut and the quality of the cutting edge are not only determined by the design of the machine tool , but also related to the feed of the focusing device or the workpiece, or a combination of the two.

Under the control of the computer, the laser is discharged by pulses to output a controlled repetitive high-frequency pulsed laser to form a beam with a certain frequency and a certain pulse width. The pulsed laser beam is transmitted and reflected through the optical path and focused at the focusing lens group On the surface of the processed object, minute, high-energy density light spots are formed, and the focal spot is located near the surface to be processed, and the processed material is melted or vaporized at an instant high temperature.

The guide rails, racks, and gears of the CNC flame cutting machine must be frequently maintained and lubricated to keep the surface clean, reduce unnecessary wear, extend the service life of components, and improve the quality of workpiece processing.