**Intelligent Rope-way Switch Operation**
The intelligent rope-way switch functions in conjunction with the belt conveyor. In case of an emergency, pulling the rope connected to the swing arm will cause the arm to rotate, driving the cam and triggering the microswitch, which sends a stop signal to halt the conveyor system.
**Installation and Adjustment of Intelligent Bidirectional Rope Switch**
The device is typically installed along the two-wire frame of the belt conveyor. Secure the rope switch to the bracket using appropriate fasteners.
2. The distance between two switches should be maintained at 25–30 meters. Connect the cables using a wire rope with a diameter of Ф4mm. The rope should have moderate elasticity to ensure reliable operation.
3. To minimize the impact caused by the weight of the wire rope on the switch, support rings are welded onto the frame every 3 meters. These rings help support the rope and ensure smooth and consistent performance.
**Installation Notes for Intelligent Two-way Rope Switch**
1. The product housing includes a grounding terminal. It is essential to ensure proper and reliable grounding during installation and throughout its use.
2. Installation should not take place in areas where toxic gases that may corrode aluminum alloys are present.
3. Maintenance should only be performed in a safe location or when it has been confirmed on-site that no flammable dust is present.
4. Keep the switch cover clean at all times. Dust accumulation should not exceed 3mm in thickness to prevent interference with the internal components.
For reference, the dimensions and wiring diagram of the Smart Two-way Rope Switch are provided below. This visual guide can assist in proper installation and connection.
Extra Transparency Laminated Switchable Film
Extra Transparency Laminated Switchable Film,Frosted Window Electric Film,Curtain Wall Magic Adhesive Film,Selfadhesive Switchable Smart Film
Shenzhen YuGuang New Material Co.,Ltd , https://www.ygsmartfilm.com