The electronic fence is mainly based on blocking, and the alarm is supplemented by blocking, alarming, and monitoring. The system gives instantaneous lightning to the intruder. Has a strong deterrent effect. Prevent the occurrence of incidents, reduce the workload after the incident, and reduce the social crime rate. Electronic fences can be used in conjunction with lights, bells, and cameras to remotely monitor and intelligentize.
Of course, the advantages of maintaining programs during use are also very important.
The first is the efficient and sensitive sensing function of the electronic fence. When we are using electronic fences, it is inevitable that we need to be able to provide us with early warning and protection guarantees efficiently and accurately. Therefore, electronic fences inevitably need more technology to achieve the relevant sensing functions, so that it can bring us more reliable security protection.
This is followed by a control mechanism for reliable false alarm rates for electronic fences. If we often use electronic fences to make false alarms, then it would be very inconvenient for us to take relevant measures. It will also greatly increase our cost of use and time. This is also extremely unfavorable for our later security work. Therefore, in the false alarm rate, the electronic fence is controlled using strict technology, so that our related work can be carried out more efficiently and reliably.
Installation Precautions
1. When installing the electronic fence, it is best to choose sunny installation, must not install electronic fence in the case of wind and rain thunder and lightning, so as not to give people's lives and property to bring about shade.
2. When installing the electronic fence and debugging the electronic fence, it is necessary to be alert to the danger brought by the high pressure. If necessary, the high pressure must be relieved. When the live working is required, the conductive part of the electronic fence system must not be touched.
3. When the electronic fence is installed, if there is any electric shock or other safety problem, the power supply should be cut off immediately, and be repaired and maintained by professionals. Non-professionals should not repair the product on their own.
4. After the product is properly installed and debugged, the technical personnel shall respond to the user's corresponding technical training to ensure that the user can operate the electronic fence with skill and safety.
Use caution
1. There must be special personnel to manage and maintain the electronic fence. Everyday records of the system's operation must be recorded and abnormal conditions must be found. In case of emergency, the electronic fence system should be closed, and professional technicians should be required to perform inspection and maintenance.
2. There must be special personnel responsible for the defense and demolition and make corresponding records. Non-professionals are not allowed to handle it without authorization. When maintenance or other reasons are required to close the electronic fence system, special personnel are required to carry out on-site maintenance and management. I don’t know that people have opened electronic fence products because they don’t know the situation, and have caused potential safety hazards to others’ lives and property.
3. Check the electronic fence system at regular intervals once a day to check whether the work is normal and stable. If abnormal conditions are found, turn off the power supply during the emergency and consult a professional for troubleshooting.
4. Do a good job of maintenance of the equipment on a monthly basis, and complete the clearing of the electronic fence system, and make records. At the outer end, it is necessary to check whether the electronic fence line is normal. If it is found that the electronic fence line is in contact with the surrounding trees, it shall be handled in time, and the electronic fence line and other branches will be prevented from causing damage to the electronic fence system.
The trolley is self-propelled, and the hoist mounted on the trolley moves the steel mold and the needle beam more relative to each other, and the trolley can move forward.
When the Needle Beam Trolley is lining, the bottom, the side and the top are formed at one time. The vertical mold and the mold removal are completed by the hydraulic cylinder, and the positioning is performed by the vertical cylinder and the leveling cylinder of the base. The trolley is self-propelled, and the hoist mounted on the trolley moves the steel mold and the needle beam more relative to each other, and the trolley can move forward.
Needle Beam Trolley
Needle Beam Trolley,Needle Beam Template Trolley,Concrete Needle Beam Trolley,Needle Beam Geared Trolley
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com