In this rainy and foggy period of clearing, people feel "internal and external troubles." The "internal worry" is the dampness of the room, and the "external trouble" is the continuous rain outside. To this end, many people complain that "the outing is inconvenient, the interior is damp and can't stay any longer."
Then, how can we solve the "internal worry" for people and cut off "external troubles"? One expert pointed out that to solve the problem of "internal and external troubles", it is best to adopt the method of "internal and external repair".
The so-called "internal repair" means that the indoors should do a good job of absorbing water vapor and maintaining a dry environment. For example, people can place dehumidification boxes, desiccants, quicklime bags, flour, dried tea leaves, etc. in the bottom of the bed, cabinets, shoe cabinets, corners, etc. In addition, you can also purchase a household dehumidifier.
However, it is not enough to rely solely on "internal repair". If you want to cure the problem, you have to rely on "external repair." It is well known that the indoor temperature in spring is generally lower than that in the outdoor. When the outside hot and humid air enters the room with a lower temperature, it will condense into water vapor, which will cause moisture in the room. In order to effectively cut off the collision between "wet hot air" and "low temperature air", connecting doors and windows inside and outside the room plays a key role.
According to the survey, 35% of consumers reported that they were very wet when they closed the doors and windows. There was no difference between closing and closing the doors and windows; while 25% of consumers said that the humidity in the doors and windows was alleviated. The same is to close the doors and windows, why are there two very different situations? In order to understand the details, the reporter conducted an in-depth investigation. In the survey, the reporter found that 85% of consumers who used the 25% to close the humidity in the doors and windows to use the aluminum alloy doors and windows, of which 50% of the consumers used similar Fuxuan Aluminum doors and windows of large brands such as doors and windows.
Secret: Qingming wet season, aluminum alloy doors and windows moisture-proof skills
It is reported that Fuxuan doors and windows are the chief brand of Chinese luxury doors and windows, and the current annual output has reached 2 million sets. According to the introduction of Fu Xuan doors and windows, Fu Xuan doors and windows use special imported raw materials and national inspection-free aluminum, and have their own tempered glass factory, providing uninterrupted supply of glass, so that aluminum alloy doors and windows products have the characteristics of durability, waterproof, fireproof and anti-corrosion. . It is also the only company in the industry that can achieve products without fog and deformation. In addition, the company chose German Seglia to upgrade hardware accessories, which has created a high-end perfect quality.
When asked why the wooden doors and windows and aluminum alloy doors and windows in the moisture-proof performance, the difference is so large, Fu Xuan doors and windows Li told reporters that although the wooden doors and windows are noble, but if you encounter wet and rainy weather, it may be moldy, deformed, It became very impractical. The kitchen door, balcony door and exterior window are intimately in contact with water vapor for a long time. Once the topcoat is eroded, the wood inside is very easy to decay. Relatively speaking, the toughness of aluminum doors and windows is stronger, and the performance of anti-corrosion, waterproof and heat preservation is more obvious when faced with wet weather. However, the aluminum alloy door and window products on the market are now inconsistent. If you buy a product with poor quality, the moisture-proof and waterproof function will be greatly reduced.
Therefore, Mr. Li shared with the public some tips on how to choose aluminum alloy doors and windows:
1. Consumers can choose profiles with three or four cavity configurations. Generally, rainwater can be discharged through the independent drainage chamber of the outer layer, and the middle layer is provided with a completely isolated cavity, which effectively insulates water into the enhanced steel cavity and protects the inner layer steel from corrosion.
2, consumers should check the tightness of sealing tops and glass sealant before purchasing, which is a "library" to improve water tightness and air tightness.
3, when consumers are shopping, it is best to pay attention to hardware, such as locks, hinges, sealing strips, positioning pins and wind bracing and other components. These parts are often subject to friction, so the materials used are more durable. Some poor manufacturers will replace them with inferior materials in order to save costs. If they are inexperienced consumers, they will be easily fooled. Therefore, you should pay attention to the inspection when you choose, you can find a friend who knows how to help or go to the regular aluminum alloy door and window brand to buy.
Finally, Mr. Li said that Fuxuan doors and windows will continue to adhere to the corporate belief of “development-oriented, technology-based, and innovative soulâ€, continuously strengthen the monitoring of quality, enhance the brand image of “Fuxuanâ€, and persistently serve our customers. Provide better products and services. In the future, Fuxuan doors and windows will be diversified, humanized and internationalized.
[Follow the WeChat public number "Jiuzhengmen Window Network" to view the latest hot article "Who left the seat, who are you? (worth everyone thinks)" More industry exchanges please join the Jiuzhengmen window network exchange group]
Joint Rehabilitation Tape
I. Description
Joint Rehabilitation Tape is Cold applied tape coating system for anti corrosion of field joints,fittings, and specifically piping. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing.
The Joint Wrap Tape shall be applied by hand or with a wrapping machine.
II. Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III .Features:
Heavy duty adhesive
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Conformable to irregular shapes.
Meets ASTM D 1000 Standard
Cold applied
â…£ .Technical datas:
Joint Rehabilitation Tape
Joint Rehabilitation Tape, Pipe Joint Tape, Pipeline Joint Rehabilitation Tape, PVC Pipe Wrap Tape
Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com