Since the construction of latex paint is relatively simple and convenient, some owners want to save some decoration costs, so they plan to paint the walls by themselves. In home improvement, brushing the wall is a very important process. If the construction quality of the wall is not good, it will not only leave some safety hazards, but also directly affect the effect of home improvement. Therefore, before we paint the wall by ourselves , it is necessary to understand the steps of our own wall painting . Let's take a look at the steps of brushing the wall with the editor of the Qi family!
Steps to paint the wall yourself
1. Basic treatment of old walls
Before construction, we need to go to the store to buy some professional tools for wall brushing. It is recommended that you can choose better quality brushes, so that when we paint, we can paint a thicker coating, so that we can put the original bottom The color is covered, while also ensuring the durability of the paint film, which can withstand our repeated scrubbing. In addition, we also need to clean up the old wall, which can be directly sanded with sandpaper, and then painted with latex paint.
2. Clean up the old wall
If there are debris on the original wall, we need to clean it up. If there are irregularities, we need to shovel and fill them, and then use white cement to smear a layer on it as the base layer. If the wall is already smooth enough, then we only need to polish it. Before painting, we need to stir it evenly and let it stand for 20 minutes. After the bubbles on the surface are eliminated, we can paint on the wall, so as to avoid the phenomenon of pin holes or small bubbles after the latex paint is painted on the wall.
3. Brush primer
When painting, we need to paint a layer of primer on the wall first, and use it as the base surface. This process must not be omitted. If the wall is not primed, it will be de-powdered, moldy, or discolored on the wall for a long time. When preparing latex paint, we need to mix water and latex paint according to a certain ratio. If too much water, it is easy to cause poor film formation of latex paint, which is difficult to achieve our ideal decorative effect.
4. Wall repair
After each brushing, we need to leave it for a while, wait until it is completely dry, and let it sit for 2-4 hours before painting. Or after we have painted the latex paint, we can feel it with our fingers. If the lacquer surface you pressed with your fingers does not feel sticky (finger dry), it means that we can paint.
Editor's note: The above is the relevant content of the Qi family editor and everyone's self- explanation step , I hope to give you some reference! For more related content, you can pay attention to Qi family information, and more exciting content will be presented in the future!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
Steps to paint the wall yourself
High Quality Ammonium Hydroxid,Ammonia Water Cheaper Price,Ammonia Solution Price,Ammonium Liquid
Shijiazhuang Xinlongwei Chemical Co., Ltd. , https://www.xinlongwei-chem.com