Electric shutters are widely used in some office space due to their convenient operation, but more and more electric blinds have entered the civilian house with the demand of modern life. Then what are the characteristics of electric shutters in the use of what are the unique advantages of the following Xiaobian to give you a detailed introduction about the characteristics of electric shutters and electric blinds often appear in several problems. 
"Electric blinds" have breakthrough innovations by using DC motors to drive the blades to move instead of the traditional shutter blinds, making them easier and freer in the operating process. The slats made of aluminum, wood or PVC have automatic flipping function, which can adjust the natural lighting level of the room more accurately. The light can be adjusted according to the needs of indoor users to achieve the best visual comfort. . Electric blinds can effectively block ultraviolet rays and direct sunlight to prevent the "greenhouse effect", which is beneficial to the insulation effect of the entire building, which is conducive to energy conservation.
Specifically, electric shutters have the following characteristics:
Several problems often occur in the installation of electric shutters
Problem I. Large gaps between electric shutters and frames during installation
If this is caused by the large gap between the electric shutters and the frame, it is generally because you are not able to plan the installation and the door frame is not perpendicular to the ground. At this time, you can remove the electric shutters to the frame. It is better to reinstall it after it has been fit. If the door and window frame are not vertical, you should find the gasket in the frame plate.
Problem two: The electric shutter switch does not go smoothly during installation
If you find that the electric shutter switch is not very well used during the installation, it is a time to check if your lock installation is a problem. To remove the tongue plate and use a chisel to repair the tongue and groove, it is better to install the tongue plate after adjusting the position of the bolt mouth of the frame.
Problem 3: The side of the electric shutter window is not vertical during installation
Caused by the installation process is not perpendicular to the side of the electric hole, in general, the reason is that it does not find pad wood to find straight, should be reworked flat, so that there will be no such phenomenon.
Problem 4, the surface of the installation has chromatic aberration, damage, rot, crack
If you find that your electric shutter has surface color, breakage, rot and cracks during the installation process, you will need to replace it with a decorative panel.
Problem 5: Unsatisfactory installation of electric shutter hardware
If you find that the hinges of the electric shutter swing doors are not upright, this will cause the sashes and the frame to be uneven. At this time, you only need to unscrew one screw from each hinge and then adjust it to buckle it again. Installed on it.
Summary: What are the features of the electric shutters and the problems associated with the installation of the shutters? A brief introduction to this, electric shutters are still more unique features, so they are also widely used materials, but must pay attention to the details when installing This will only make your use smoother.
Oleic Acid,Oleic Fatty Acid,Pesticide Emulsifier,Tallowamine Pesticide Emulsifer
Sichuan Tianyu Oleochemical Co., Ltd , https://www.sclthoil.com