There are a lot of people who choose the duplex building. Its appearance is more fashionable and gives the impression of the atmosphere. But the duplex building needs to have stairs to connect. This is one of the reasons people love the duplex building, but the type of stairs is very and more, the material is different, then the curved staircase handrail what material it? curved staircase handrail installation points of what it? Xiao Bian below the decoration of the home network come to tell you about it.
First, the curved stair handrail material
1. Stainless steel stair railing
Stainless steel stair railings are made of stainless steel and are mainly divided into armrests, columns, bases, etc., often referred to as stainless steel stair rails. Stainless steel stair railings are widely used in most shopping malls today. They have a good feel and a modern feel. The main features are not rust and long service life.
2. Solid wood stair railing
From the design to the carving, the solid wood stair handrails are a kind of ideological presentation, a full understanding of the requirements of individualized human settlements, and a pursuit and yearning for all good. The stair handrail of pure solid wood structure is thick and firm, the texture is fine and the stability is high. Such solid wood stair railings are installed at home, the overall home style becomes more calm and atmospheric, and a stable life attitude can be reflected in the furniture. come out.
3. Iron staircase handrail
The wrought iron stair handrails are assembled in an assembled form, completely changing the many drawbacks of the traditional wrought iron railings. It can be measured on site according to the specific size of the stairs in the home. The wrought iron stair handrails are easy to install and do not require on-site welding. This kind of stair handrail has fine workmanship, smooth surface and high quality.
Second, the arc stair handrail installation points
1. According to the slope of the top surface of the slab or railing, match the starting elbow, the general wooden handrail, the elbow can be cut with the handrail material, and the seam is bonded by the cutting angle. At least the stripping section should be considered. The three screws are fixedly connected to the support fixing member. When the armrest joints with a section larger than 70 mm are prepared, in addition to the bonding, they should be shackled or ironed underneath.
2. When the stair handrail adopts the integral elbow, the full-scale model should be made before the production, and the blank is drawn on the elbow material to make the blank (the blank size is generally larger than the actual size by about 10mm). When the elbow is bonded, the operating environment temperature must not be lower than 0 °C. The groove under the elbow should be tightly combined with the railing flat iron, and should not be loosened. The wood screw should be drilled and then screwed in. It must not be directly driven by a hammer.
If a family has a stair installation, this house is not a duplex type or a villa type, then what are the materials and installation points of the curved stair handrails, I think you have read the above introduction of the small series, and I understand them. Then if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.
Tiled Roof Flashing,Waterproof Roof Flashing,Rubber Roof Flashing,Epdm Roof Flashing
Ningbo Yongsheng Rubber And Plastic Products Co., Ltd. , https://www.yscnrubber.com