If installing a shower room in the bathroom is very good, it can bring more convenience to our life, not only that it is relatively healthy, so people now choose to install a shower room in the bathroom. so shower room installation What are some tips that? shower installation which is that we need to pay attention? then you Xiaobian renovated home network together to tell you about it.
First, the shower room installation skills
1. The shower curtain rod is usually mounted at a height of about 2.06 meters from the ground (depending on the individual's habits and the height of the bathroom). Put the shower curtain rod in the position where it needs to be installed. Try to set the drilling position and make a mark.
2. The appearance of the shower room should be neat and bright after installation. The sliding door and the sliding door are parallel or perpendicular to each other. The left and right symmetry and sliding door should be opened and closed smoothly, without gaps and water seepage. The shower room and the bottom basin are sealed with silicone.
3. Test and protection: After installation, test water test is required to ensure unimpeded water flow. Fourth, find a position, punch: use a pencil, level to determine the drilling position of the wall aluminum, punch with a hammer drill.
4. Drill holes in the wall with a drill bit of 12 mm diameter (drilling depth is about 6 cm). When drilling, make the drill bit slightly downward, and the buttocks slightly upward after the electric drill, which can effectively prevent the shower curtain rod from sagging.
Second, the shower room installation points
1. The regular shower room manufacturer will send professional staff to the door to install, the use of tools will be with you, faster and more convenient. The bottom basin of the shower room must be carefully installed, and testing the water is an essential part. If the shower room body is installed, it is more difficult to make larger changes. Before installation, check whether the packaging of the shower room is complete. After opening, be sure to check whether the configuration is complete.
2. The pre-buried hole size of the shower room should be designed before the bathroom is not renovated; the wiring leakage protection switch device should be considered before installation in the shower room to avoid rework. The style of the shower room should be determined according to the space form of the bathroom. Now the shower room has more corners or one-line type, which can be used well for the bathroom space.
3. When using sealed silicone, do not apply silicone to the surface of acrylic sanitary ware. If you accidentally apply a little, don't rush to wipe, it is more difficult to remove, should be gently removed after curing, it is strictly prohibited to scratch with a hard object, otherwise it will cause surface damage. After the bottom basin is installed, it should be used after the silica gel is fully cured (silica gel curing time is 24 hours).
Some people in the bathroom will choose to install the shower room. The shower room can bring us more sanitary facilities. Then, what are the installation skills and installation points of the shower room? I want to see the introduction of the above small series. I also understand it, if you still want to know more about decoration information, please continue to pay attention to the decoration home Internet cafe.
More related wonderful reading:
Simple shower room function introduction simple shower room installation method
How to install a home shower room? How to charge for shower room installation?
How to install the shower room correctly? Detailed explanation of the installation steps of the shower room
Shower room installation process shower room installation precautions
Glowing Tape,Luminous Tape,Glow In The Dark Tape,Glow In The Dark Duct Tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com