How to choose tiles
The first step: Take any piece from the packing box to see whether the surface is smooth and in good condition. The glaze should be uniform, bright, no spots, lack of glaze, bumps, and the surrounding edges should be regular. Glazing is not bright, astringent, or air bubbles are quality problems.
Step 2: Take another piece of brick and align the two pieces. The smaller the middle gap, the better. If it is a pattern tile, four pieces must be used to piece together a complete pattern, and whether the pattern of the brick should be connected and clear should be considered. Then take out a box of bricks and place them on a large flat surface. Look at the effect from a little distance away. Whether it is white or other colors or patterns, the color should be the same. If there are individual bricks, shallow points, it will be difficult to see. , affect the entire decorative effect
The third step: put these bricks together and erect them. Compare the size of the bricks. If the deviation of the small bricks is plus or minus 1 mm, the big bricks are allowed to be plus or minus 2 mm.
Step 4: Take a piece of brick to knock another piece, or use other hard objects to knock on the brick. If the sound of the brick is crisp and loud, it means that the quality of the brick is good and cooked; if the sound is abnormal, it means there is heavy leather inside the brick. Or crack phenomenon: when the heavy skin is the brick forming, the material in the air is not discharged, resulting in poor combination of materials and materials, internal cracking, can not be seen from the surface, only the sound can be identified.
Tiles in several categories
Glazed tile: refers to a brick that has a glazed layer on the surface of the brick. This kind of brick is divided into two types: one is made of clay, and the other is made of porcelain clay. About 80% of home decorators currently choose this brick as the floor decoration material.
Fullbody brick: This is a non-glazed porcelain tile with good slip resistance and abrasion resistance. Generally referred to as "non-slip floor tiles" are mostly full bricks.
Polished bricks: All bricks are polished after polishing and they are very hard and wear-resistant.
Vitrified tiles: This is a high-temperature fired porcelain tile, which is the hardest of all tiles. Sometimes the tiles are still scratched when the tiles are scratched.
Mosaic: many specifications, thin and small, hard texture, acid, alkali, wear-resistant, watertight, resistant to pressure, not broken, colorful, versatile.
Common specifications: Tile size 400x400mm, 500x500mm, 600x600mm, 800x800mm
Tiles to buy decorative home decoration tile specifications acid tiles
The nail can be divided into Common Nails , Steel Nails , Pallet Nails , Bamboo Nails , black steel nail, hobnail, brads Nails , Roofing Nails .
Raw material: low carbon steel and high carbon steel.
Surface treatment: zinc plated, color plated, polishing, sulfur black.
Iron nail is a thin iron rod, which one end is a flat head, another end is a sharp point.
It have Functions of fixing or connection, and it can also be used to hang objects.
It was widely used in furniture, building, floor, building, ship etc.
Nails
Common Nails,Steel Nails,Concrete Nail,Pallet Nails,Bamboo Nails
Anping Weihao Hardware Wire Mesh Products Co., Ltd. ,