Earthquake floodlights are widely used in a wide range of lighting in various large-scale operations, construction machinery, factories, construction sites, construction machinery, construction sites and landscape lighting.
Performance characteristics
1. All the light sources and electrical appliances adopt international famous brands with reliable performance and a brightness about 20% higher than similar products.
2, the average lamp life of up to 12,000 hours or more, eliminating the hassle and inconvenience of frequent replacement of light bulbs.
3. The exquisite breathing apparatus is designed at the rear of the shell to balance the pressure difference between the inside and outside and completely eliminate the condensation phenomenon.
4, using internal and external anti-vibration structure design, effectively solve the strong shock caused by the loss of light bulbs, lamp life is shortened, stent fracture and other issues.
5, the use of lightweight alloy materials and high-tech spraying technology, the shell does not rust, corrosion.
6. Adopt new processes such as piping to ensure the integrity of the shell, reliable sealing, waterproof and dustproof.
7, according to customer needs matching shock absorbers, can ensure that the lamps in the vehicle, locomotives and other high-vibration equipment safe to use.
Maintenance and overhaul
Before installation, shock-proof floodlights shall be checked against the nameplate and the product specification: type, type, grade, group of the lamps and lanterns; degree of protection of the shell; installation method and fastener requirements for installation. The installation of the luminaire shall be securely secured, the fastening bolts shall not be arbitrarily replaced, and the spring washers shall be complete. The dust-proof and waterproof seals should be placed as they are. When the cable enters the line, the cable and the sealing gasket should be closely matched. The section of the cable should be round, and the surface of the jacket should not have defects such as asperities. Extra inlets shall be sealed in accordance with the type of explosion protection, and tighten the compression nut to seal the inlet.
In routine maintenance, the following points need to be noted:
Earthquake floodlights and lampshades should be able to automatically cut off power before they are turned on. However, due to the complexity of setting up the interlocking device, it is difficult to implement. Therefore, most lamps and lanterns only have warning signs such as “No live-on†on the obvious part of the enclosure. Because the surface temperature of the bulb is still high after power off, if the lampshade is immediately opened, there is still the danger of igniting explosive gas mixtures (mainly flameproof structures). Therefore, incandescent lamps, high-pressure mercury lamps, and high-pressure sodium lamps have high surface temperatures. The shock-proof floodlight that can quickly open the cover should pay attention to this point.
When replacing a lamp (tube), the lamp shall be properly protected from damage; the cleaned surface shall be coated with a phosphatized paste or 204-1 anti-rust oil; no paint shall be applied on the surface; there shall be no rust on the surface, if any Slight rust, no pockmarking after cleaning. The seals used for dust protection and waterproofing must be kept intact. This is very important for the increased safety lighting. If the seal is seriously damaged, replace it with a seal of the same size and material and replace the entire light if necessary. When overhauling, pay attention to whether the lampshade is intact and replace it immediately if it is broken.
PVC 3D Table Top PanelL
We are the manufacturer of pvc marble panel and Table
Top Panel, with it`s great advantage ,it is very
popular in China these years, and It has the features of
bright surface, natural design, Insulation, abrasion resistance, chemical
resistance, water proof, Hygienic, fast fitting and Durable.
Feature
1. Fireproof
PVC 3D Table Top Panel is non-flammable and conforms to the national grade B1 standard (GB8624-2012 Grade B1).
2. Water-proofing and moisture-proofing
The product is allowed to long-term expose to moist environment.
3. Easy to install
PVC 3D Table Top Panel is easy to cut, saw nail, stick. it has a smooth finish one side that can be taped and jointed ready for decoration including wallpapering, painting, texture coat and veneer, and a rougher side for tiling.
5. Environment
PVC 3D Table Top Panel does not contain any organic solvents, formaldehyde, asbestos, oils or other toxic substances that can have a negative impact on the environment and waterways.
|
Specification size
|
1200mm*2400mm
|
|
Surface Finish
|
High UV coating
|
|
Thickness
|
1-9mm
|
|
Color
|
Customized colors
|
|
Hardness
|
3H-6H
|
|
Materials
|
PVC
|
|
Type
|
PVC 3D Table Top Panel
|
|
Installation
|
Easy installation
|
|
Life Span
|
15 years
|
|
Place of original
|
China
|
PVC Cabinet And Furniture Surface Panel
Pvc 3D Texture Table Top Panel ,Pvc 3D Marble Table Top Panel ,Pvc 3D Flower Color Table Top Panel ,Pvc 3D Solid Wood Table Top Panel
Shandong Kingmarble Decoration Materials Co.,Ltd , https://www.pvcpanel.de