Plastic water tanks can be seen in our lives. Plastic water tanks are divided into two types. One is the kind of plastic water tank that we use for domestic use, and the other is the kind of large water tank that is suitable for industrial use. There are two uses for such plastic water tanks, one for holding water and the other for holding corrosive liquids. Therefore, their choice of materials is not the same. Plastic water tanks for holding water It is completely environmental-friendly and non-toxic. The tank for storing corrosive liquids requires strong acid and alkali resistance and corrosion resistance. Next Xiaobian introduced to everyone how plastic scent and plastic water tank performance.
How to remove odor in plastic water tank
1, soapy deodorization
We can first pour the soapy water into the plastic water tank, add less detergent, and then wash it for 30 to 40 minutes. The odor on the plastic water tank can be removed.
2, bleach deodorization method
You can also use household bleach to remove odors, pour bleach into the water tank, and then remove the odors after a period of time.
3, baking soda deodorization method
Use a spoon in our usual household spoon and dilute it with one litre of clean water. Then immerse the plastic water tank in a few minutes and then wash it. After that, wipe it again with a cloth product to remove the odor.
4, newspapers to taste method
Newspapers can also be used for odors. First, the water tanks should be used cleanly, and then the waste newspapers should be poked into a water tank. After 12 hours, the odor in the tank is absorbed by the ink in the newspaper.
Plastic tank purchase
1, see the scratches. In general, in order to ensure the quality of plastic water tanks, it is better to have no scratches on the water tank at the time of purchase. However, the industrial-sized large-sized plastic water tank is very bulky, and collisions occur during transportation and transportation. Therefore, consumers can ask the manufacturers to be as careful as possible in the transportation process.
2, see the color. Better industrial plastic water tanks are more uniform, if you see that the color of the purchase is uneven, it must be done with a relatively poor material, or that other materials are mixed;
3, see the finish. Glitches are common in most products, but plastic water tank manufacturers of good quality use machines to remove burrs as much as possible to keep the surface of the tank clean and smooth. If the plastic water tank barrel surface is too uneven, then its quality is certainly a problem, we must choose carefully;
4, see bubbles. This is the most important part of checking the water tank. If there are air bubbles in the water tank of that kind of industry, water leakage will occur in the process. This is also the most feared problem for consumers and the most easily overlooked issue. Therefore, we must carefully check the bubbles, lack of material, etc. around the plastic water tank before confirming the purchase.
Editor's summary: The plastic cistern is introduced here to the odor and the performance of the plastic water tank. I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Water tank plastic water tank
1.Adopt quality ABS resin raw material, imported UV. 2. ABS solid edge banding have matt+high gloss+emboss finish surface. 3.Customize size and color.size range from 0.35-3.0mm thick and 12-620mm width. Above 98% matching to customer`s standard panel. 4.Eleven years ABS manufacture experience. 5.Strict quality control system; well after-sales service are promised:strict test during every step of ABS Edge Banding produce. 6.Won high praise from cooperated customers 7. We promise to only offer high quality edge banding.
ABS Solid Color Edge Banding
ABS Solid Color Edge Banding, Solid ABS Plastic Edge Banding, Furniture Solid Color ABS Edge Banding, ABS edge banding single color, unit color ABS edge banding
Sinowolf Plastic Dekor Co., Ltd , http://www.sinowolfdekor.com