As a decorative material, wallpaper has always been loved by consumers. It has a good decorative effect, and has a variety of patterns, bright colors and different shapes. Each pattern can give us different visual effects. The next small series for everyone to introduce how to paste wallpaper wallpaper and how to distinguish the quality of the wallpaper.
How to paste nice wallpaper
1. First, the original paint or other objects on the wall must be removed. If there are cracks or potholes on the wall, gypsum powder is needed to make up the leveling, and after the leveling, a bandage is applied. If there are sand walls and partition walls, glass fiber cloth or good fabrics are also to be attached; some poor quality partition walls or external walls have to achieve the effect of heat preservation and need to be filled with nail plaster boards.
2, when the thickness of the brush bottom oil can not be too thin, and then in the alkyd varnish uniform brush on the wall
3, first putty on the wall scraping, it is best to scrape twice, after the putty dry, and then use the sandpaper to smooth the wall surface, wear off the uneven particles, so that the wall smooth, flat;
4, in the use of oil on the wall smear, can not be too thick, this is to prevent the wallpaper glue is absorbed by the wall, so that the wallpaper attached to the wall, but also make the wall more flat;
5, when cutting wallpaper, wallpaper pattern, color, size should be consistent
6, in the paste wallpaper, there are crevices and adjacent wallpaper to be symmetrical, consistent, with a scraper to press the gap, and clean out of the plastic. After the wallpaper is pasted, use the scraper to paste the wallpaper from top to bottom.
How to distinguish the quality of wallpaper
1, see: color and interface
Wallpaper quality is good or bad, you can see whether the surface of the wallpaper is smooth, whether there is color, fuzzy, etc., the clearer the better the pattern; followed by the number of weaving and sophistication, mainly for non-woven fabrics and wall coverings, etc., depends on the positive and negative, The higher the surface pattern density is, the better the quality is.
2, touch: feel and toughness
When you judge the quality of wallpaper, you can touch it by hand. If you feel soft and comfortable, it means that the quality is good and the flexibility is strong. However, if the domestic wallpaper and the imported wallpaper with the same material, the imported wallpaper will be relatively thick and high density.
3, smell: bad wallpaper has odor
A good wallpaper has no odor. If it is a bad wallpaper, there is an unpleasant odor that can be smelled by careful reading.
4, rub: test wear resistance
The wallpaper is very strong and wear-resisting and dirt-repellent, so when you discriminate the quality, you can use the pen to draw on the paper, then use the eraser, and generally high-quality wallpaper, even if the surface has uneven texture, it is easy to clean, but if It is a poor wallpaper, it is easy to wipe or wipe clean.
Editor's summary: How to distinguish the quality of the wallpaper and the quality of the wallpaper is introduced here. I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Wallpaper wallpaper purchase wallpaper maintenance wallpaper how to paste good-looking
MAPP GAS can be used in combination with oxygen for heating, soldering, brazing and even welding due to its high flame temperature of (3600 °F) in oxygen. For small-scale welding with Mapp Gas this is not a serious problem,. Mapp Gas is also used in combustion with air for brazing and soldering, where it has a slight advantage over competing propane fuel due to its higher combustion temperature of (3,600 °F) in air.
MAPP GAS
High Quality MAPP GAS,Welding Gas,Brazing Gas,Soldering Gas
ZHEJIANG ZHONGLAN REFRIGERATION TECHNOLOGY CO.,LTD , https://www.uiszl.com