Main technical parameters of TD-1200H-NO portable nitric oxide detector

TD-1200H-NO portable nitric oxide detector features imported high-precision sensor LCD dot matrix display technology, support Chinese and English display interface gas concentration unit PPM, mg/m3, etc. can quickly switch display portable nitric oxide detector TD- 1200H-NO technical parameters Product type: chlorine dioxide detector
Detection principle: Electrochemical principle range: 0-1ppm, 0-10ppm, 0-20ppm, 0-50ppm (range is optional, the range is not listed)
Resolution: 0.001ppm, 0.01ppm (related to the selected range)
Accuracy: 3% FS
Sampling method: diffusion type (optional external sampling pump)
Concentration unit: ppm, mg/m3 can be switched by one button. The concentration value is automatically converted by the system. Display technology: Monochrome dot matrix 128*128 LCD graphic display backlight: Manually set the backlight time, automatically turn on the backlight when the alarm is directly reading: gas Molecular formula, concentration unit, measured value, time, battery, alarm status, data recording status, etc. Data record: over 100,000 sets of stored data, five minutes storage interval, can be stored continuously for 15 months, storage interval is adjustable from 10 to 3600 seconds ( Optional)
Data transmission: USB interface data transmission, with PC software, downloadable print data (optional)
Calibration: Two target points are calibrated, both points can be set to the calibration value, support one-button full-channel automatic scalar function password protection: calibration with password protection function, password reset function
Recovery operation: support to restore the factory calibration function, restore the factory parameter setting function. Operating language: support Chinese and English operation interface
Alarm mode: sound and light alarm, high and low alarm points can be set, alarm status can be set: open, close, forbidden battery: 3.7V rechargeable lithium battery, battery capacity 1800mA, working time is greater than 50h (no gas), charging The time is less than 6h.
Charger: Travel charger with USB interface Explosion-proof rating: ExiaIICT4
Protection level: IP66
Working temperature: -20 ° C ~ 50 ° C
Working humidity: 0-95%RH (non-condensing, humidity greater than 90% RH, need to be equipped with filter drying cylinder)
Housing material: ABS+PC
Dimensions: 155*78*35mm (length * width * height)
Machine weight: 300 g



TD-1200H-NO portable nitric oxide detector features
It adopts imported high-precision sensor LCD dot matrix display technology, supports Chinese and English display interface gas concentration unit PPM, mg/m3, etc. It can quickly switch to display super high buzzer alarm sound, high and low level alarm value can be set with data storage function. Historical data can be viewed on the instrument, or connected to a computer to export print data (optional)
The large-capacity lithium polymer rechargeable battery can ensure the long-term continuous operation of the instrument. The high-grade alligator clip can be easily carried during the operation. The shell is made of high-strength special engineering plastic. It is durable and durable. It has beautiful appearance and beautiful aluminum alloy instrument. Packing box

Portable nitric oxide detector
Http://news.chinawj.com.cn Main technical parameters of TD-1200H-NO portable nitric oxide detector Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn Main technical parameters of TD-1200H-NO portable nitric oxide detector

Structural Insulated Panels (SIPs) are high-performance building materials used in wall, roof and floor for residential
and light commercial constructions. The panels are made by sandwiching a core of rigid foam insulation (EPS, PU,
XPS) between two skins of structural/engineered boards such as OSB, plywood, cement board or magnesium board
etc. The dimension ofQuacent SIPs varies from 1220mm x 2440mm to 2400mm x 7320mm, and its thickness is from
114mm up to 31 Omm, which can meet the structural and insulation demands of all regions.
Quacent SIPs are all manufactured strictly under IS0900J-2015 quality control system. All the lumber, OSB, adhesive

come from Canada or USA with high grade certification.

Neo Img 4e360733 0791 4a3b 8be3 E2b0070c3d6c

SIPs Prefab Homes

Modular Homes,Sip Prefab Homes,Portable Homes,Fast-Built House

Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com

This entry was posted in on