1. It is strictly prohibited to use your hands to move the elevator door while inside the cabin. Once the door is opened, the elevator will immediately stop, which can trap passengers inside and disrupt normal operation. In more severe cases, it may even lead to serious accidents such as people falling into the shaft or being caught between the doors.
During the elevator's operation, passengers must not attempt to open the car door. If the door is forced open, the elevator will trigger an emergency stop, leaving passengers trapped and causing damage to the system. This behavior is extremely dangerous and should never be attempted.
Therefore, whether the elevator is moving or stationary, actions like squatting, leaning on the doors, or pushing them are all considered unsafe. These behaviors can compromise the safety of both passengers and the elevator itself.
2. Why shouldn't children ride the elevator alone?
Children should never be left unattended in an elevator. They lack the awareness and understanding of elevator safety rules. Their natural energy and curiosity make them prone to accidental operations, which can lead to dangerous situations. Always ensure a responsible adult accompanies them to prevent any potential harm.
3. Why shouldn't you jump inside the elevator?
Jumping or shaking the elevator car can cause the safety devices to malfunction, leading to unexpected stops and trapping passengers inside. This not only disrupts the elevator’s normal function but can also result in damage to internal components. Such actions should be avoided at all times.
4. What to do if the elevator is overloaded?
If the elevator is overloaded, do not attempt to enter. Passengers already inside should step out, and those waiting outside should not try to get in. When the load exceeds the rated capacity, the elevator will trigger an alarm, preventing the doors from closing and the elevator from starting. If ignored, this can lead to serious issues such as equipment failure or injury.
The above four points highlight important safety tips for elevator users. If you're still interested in learning more, I'll continue explaining other common mistakes and safety precautions related to elevator use in the next article.
Zhejaing Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter, ATEX, IECEx & CE approved. The product range covers different size from DN03 to DN150, and bigger sizes are being developed.
Sealand mass flow meter is designed and produced according to world`s latest Coriolis technology with exelent appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube, widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy, marine, power, pulp & paper, water & wastewater industries, etc.
Mass flow meter measures the mass based on Coriolis effort. The operating principle involves inducing a vibration of the tube through which the fluid passes. The vibration, though not completely circular, provides the rotating reference frame that gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.
Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com