| Home>Bearing knowledge>Functional analysis of sliding bearing grease |
Analysis of the function of sliding bearing grease
Source: Bearing network time: 2013-03-12
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
(1) Bearing load is large; when the rotation speed is low; smooth grease with small penetration degree should be selected; vice versa, high penetration bearing should be selected. High-speed bearing should use smooth grease with smaller cone penetration and good mechanical stability. The viscosity of the base oil that is smooth grease is lower.
(2) The dropping point of the selected smooth grease is usually higher than the working temperature of 20-30 ° C; in the case of high temperature continuous operation; pay attention not to exceed the smooth grease to allow the temperature scale.
(3) When the sliding bearing works in the water or wet environment; the calcium-based, aluminum-based or lithium-based smooth grease with good water resistance should be selected.
(4) Select smooth grease with good adhesion.
2. Selection of smooth grease for sliding bearings:
The load is <1MPa; the circumferential speed of the journal is less than 1m/s; the maximum operating temperature is 75°C; the calcium base grease No. 3 is used.
Load 1-6. 5MPa; journal circumferential speed 0. 5-5m / s; maximum operating temperature 55 ° C; use No. 2 calcium base grease,
The load is >6. 5MPa; the circumferential speed of the journal is less than 0.5m/s; the maximum operating temperature is 75°C; the calcium base grease No. 3 is selected.
Load <6. 5MPa; journal circumferential speed 0. 5-5m / s; maximum operating temperature 120 ° C; use No. 2 lithium grease,
The load is >6. 5MPa; the circumferential speed of the journal is below 0.5m/s; the maximum operating temperature is 110°C; the calcium-sodium grease of No. 2 is used.
The load is 1-6. 5MPa; the circumferential speed of the journal is less than 1m/s; the maximum working temperature is 50-100°C; the lithium base grease No. 2 is used.
The load is >5MPa, the circumferential speed of the journal is 0.5m/s; the maximum working temperature is 60°C; the calendering grease No. 2 is used.
In a humid environment; temperature is 75-120 ° C; should consider calcium-sodium grease smooth grease. Under humid environment; operating temperature below 75 ° C; no calcium base grease No. 3; also available aluminum grease Operating temperature is 110-120 ° C; available lithium grease or sulfhydryl grease. When the collection is smooth; the consistency is smaller.
3. Smooth cycle of smooth grease for sliding bearings:
Occasionally work; unimportant parts: shaft speed <200r/min; smooth period 5 days, shaft speed >200r/min; smooth period 3 days.
Successive operation: shaft speed <200r/min; smooth cycle once every 2 days, shaft speed >200r/min; smooth cycle once every day.
Continuous operation; operating temperature is less than 40 ° C: shaft speed <200r / min; smooth cycle once a day, shaft speed > 200r / min; smooth cycle once per shift.
Successive operation; operating temperature 40-100 °C: shaft speed <200r/min; smooth cycle once per shift, shaft speed >200r/min; smooth cycle twice per shift.
Recommend to friends comments close window
| Bearing related knowledge |
| Guidelines for the use and selection of bearings Mechanical engineering data: Rolling bearing steel The edge of the transmutation layer consisting of SKF imported bearing grinding force is the key to the correct installation and protection of the bearing without worry. FAG bearing; KX20 imported bearing new and old type scale comparison |
This article links to http://
Please indicate China Bearing Network http://
Previous:A detailed analysis of the terminology explanation of the rolling bearing
Next: Summary of the device approach and bearing disassembly method for bearings
Artificial Graphite & Active Carbon
Artificial Graphite,Active Carbon,PVC Resin
Plastic Materials Co., Ltd. , http://www.hbpolypropylene.com