Taboo 1 and the opposite door to the door
Fengshui fault
Because the indoor space is small, the small-sized house is like a small amount of lungs. Therefore, when the door of the door is in line with the door of the opposite house, when the door is close to the door, the indoor space of a pair of households is larger than that of the household. Large lung capacity), representing the gas field of the door-to-door distance space, will be absorbed by the opposite household.
Fortune influence
The area of ​​the living room has been too small for the feng shui, and the gas field outside the gate has been sucked away, which is even worse. People living in such houses are not prone to good interpersonal relationships, and it is harder for them to appear. It is even more difficult to promote work and careers. Think about it, the gas field is plundered, and the opportunities that represent life are often easily taken away by others.
觅屋诀çª
Such a building structure is the usual pattern of an apartment or building, 99% of which is the same. So I am afraid it is not easy to find a house with a wrong door. However, there is no difficulty in the world, I am afraid that there are people in mind, even if you lock in the vicinity of the school or business district, you can still run several sections, sometimes planning the construction of affordable housing, but more than the commercial residential area has the opportunity to find the door that is not right. .
Expediency
If the door is opposite the door, the distance between the two doors should be as large as possible. If you can't find a small house with a door that is not right, at least the space between the two doors is relatively wide, or the distance between the two gates is relatively long. Once the spatial distance is widened, even if the space of the opposite household is relatively large (large vital capacity), the gas field between the door-to-door between the two households is small and easy to be taken away, but it is not completely completely Take a glimpse of the light, and this family can at least get some people to eat the rest. In this way, in the interpersonal relationship, how much can leave a little room for development; the opportunity for the help of the people will not be completely severed; the business development of the work business has the potential to promote. Even if the situation is difficult and embarrassing, you can also find a space and opportunity to survive from the cracks.
Are always more numerous the installations of panels for the production both electric current and heat energy for building heating and for hot sanitary water production. But the installation of these plants have to clash with the continuous exposure of these to the disparate atmospherics conditions, from the cold of the winter season, due to the necessity of positioning the panels on the covering of the buildings, where the harshness of atmospherics changes is further amplified. The utilized materials for the built are submitted to hard stress and an high risk of wear and tear due to the corrosion. So these are the conditions on which the aluminium extruded profiles alusic better express theirs advantages compared with the building traditional materials, like steel, so far used in a lot of installations.
Huaxin power profiles advantages:
• more reduced weight of the structures;
• high resistance to corrosion thanks to anodization thickness 13-15 μm of the profiles surface and the tendency of the material to passivate in the air;
• high strenght reported to weight, obtained thanks to an attentive study of the profilesturned to the optimisation of the mass in function of the maximum of strenght;
• easy realization of the structures thanks to the large range of accessories studied on purpose of Solar Panels installations and the absolute compatibility with all the ALUSIC accessories;
• aesthetics impact reduced to minimum;
• absolutely diamagnetic of the material;
• easily recycling of the material turn to safeguard the environment also in case of dismantling of the structures.
Extruded aluminium profiles are realized in primary aluminium alloy en aW-6060 (almgsi 0.5) – en aW6063 (almgsi1). The metallurgic state of supplied bars is T6 (solution heat treatment and artificially aged).
The dimensional tolerances follow for the extrusion are in compliance with the normative for precision extruded EN12020-1.
Besides as guarantee of high quality and dependability of aluminium profiles and accessories for solar installations the quality system of ALUSIC is in accordance with the requirements of the normative UNI EN ISO 9001:2008; this is confirmation of a continuous control on raw materials and on the processing that is steady quality and improvement of products.
Finally Huaxin poower put to finally customers` disposal its Technical and Commercial Departments in the way to solve every needs and research the best solution to realize solar installations.
Solar Aluminum Structure,Aluminum Solar Panel Frame,Aluminum Solar Panel
Yangzhong Huaxin Power Equipment Co.,Ltd , http://www.huaxinbusbarchina.com