The reporter was informed that, after going through four rounds of declarations and repeated explorations, the distributed photovoltaic demonstration project finally identified three projects in each province, with a total power generation of less than 500 MW and a terminal electricity subsidy of 0.35-0.45 yuan. The term of the subsidy is 20 years.
On June 16, the National Energy Administration held a meeting to deploy the construction of the distributed photovoltaic power generation demonstration area. The 10 provinces and cities and 4 cities planning to participate in the meeting were required to report the first batch of demonstration area projects before July 10. The approved demonstration area starts construction before the end of the month.
Calculated on the basis of a subsidy size of up to 500 megawatts in a region, the first 14 demonstration areas will drive a domestic distributed photovoltaic market of about 7 GW (1 GW = 1000 MW). However, NDP Solarbuzz analyst Han Qiming is not optimistic about this. In his opinion, due to capital constraints, only 2-3 projects of the first demonstration projects can be started, and the market driven during the year is only 200 to 300 MW. between.
Photovoltaic industry is in a low period. For many PV companies, competing for a demonstration project only means staking. However, after the enclosure, where the initial investment comes from, there is no fixed number.
According to Wang Bohua, secretary general of the China Photovoltaic Industry Alliance, the debt ratio of photovoltaic companies is gradually increasing, and some companies have a debt ratio of up to 85%, especially high short-term liabilities. Together with the EU’s implementation of the anti-temporary tariffs in June, it will allow Business is worse.
Faced with the status of such industries, what will be the first batch of distributed photovoltaic demonstration projects to be opened? A three-party game between the central government, local governments and enterprises has begun.
Policy goals or discounts
Photovoltaic power generation is characterized by noiseless, pollution-free and resource-exhausted. The National Energy Administration hopes to guide enterprises to build photovoltaic power stations through government subsidy, but it has strict total control over the first batch of demonstration projects.
In October 2012, the “Notice of the National Energy Administration on Reporting Large-scale Application of Distributed Photovoltaic Power Generation Application†(hereinafter referred to as “Noticeâ€) clearly stipulated that the total amount of distributed photovoltaic power generation projects in each province will be controlled at 500 Within megawatts.
It is not easy for companies to qualify for the first batch of 72 demonstration projects.
Durostone Sheet or Synthetic stone is a kind of green and environment-friendly stone, which is composed of more than 95% natural stone powder, with a small amount of polyester and adhesives, mixed in vacuum, pressurized, and formed by vibration
Definition:
Durostone Sheet comes from the "stone kingdom" Italy, the English "composite stone".
According to the raw material into synthetic marble, synthetic quartz two kinds.
With the advantages of natural stone, large areas are paved with achromatic, environmental protection, high strength and complete variety.
Widely used in hotels, shopping malls, office buildings, public places, family walls, floors, etc.
Production process:
1. Collect stone materials from the quarry
2. Mix resin and stone powder and other materials in vacuum
3. Vacuum extruding ingredients
4. Leave about 10 days in the factory
Cut into large plates according to requirements
6. Measurement and polishing
7. Cut from the big board to the required panel
8. Waxing and corner handling and packaging
9, storage,
USES:
Main use in the wall of building adornment, ground, mesa, stair step.
The synthetic stone is used in the following areas:
1. The airport, the ground of the airport, part of the wall, the hallway, the bathroom table and the wall.
2. The public parts of the building and office buildings, such as the floor of the hall, the wall of the wall, the wall of the floor of each floor, the wall of the toilet, floor, mesa and elevator well.
3. Square, mall, these places can be used in large areas such as walls, floors, toilets, elevators and so on.
4, villa, with mesa main, in toilet also can often arrive, still have stair step.
5. Other places, such as public buildings, museums, exhibition centers, hospitals, schools, etc.
Advantages:
1, colorless difference, meet the market's natural marble directly from the mine mining, the slightly and the formation of mine decided the composition of natural stone and marble texture, so led to a number of natural stone texture of inconsistencies, and synthetic stone is to smash of natural marble, and processing and forming, so can very good control of color difference, this synthetic stone within a certain range can look without clear off color, this has the advantage of convenient and the laying of large area, as a whole to maintain consistent style.
2, environmental protection, natural marble is different according to the composition and properties, some deep color radioactive substances, and synthetic stone in choosing a natural stone powder can avoid these substances, so as to achieve no radiation environmental standards.
3, close to the natural stone texture, synthetic stone can be very close to the natural texture, color and so on some colors, the effect of synthetic stone laying large area can completely and natural stone.
4. Excellent performance, good absorption rate, and structure more closely than natural stone.
5. No crack, anti-fouling, easy to clean.
Specification: The thickness of sheet material can be produced from 3mm to 50mm,the usual specification of 3-50mm is 1150mm* 1250mm, It can also be customized according to requirements, and the width cannot exceed 1220mm, and the length is not limited
Color: Green ,can also be made another color, and the color order is 500KG.
Modified varieties: can be added to the fiberglass, copper powder and molybdenum disulphide to enhance the bar.
Add antistatic agent to the permanent antistatic electric bar, and the volume resistance value is between 6 to 9 power of 10.
Add flame retardant to flame retardant rod from UL 94V-0 to HB flame retardant grade. Other modification requirements are customized according to customer's actual use.
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
Durostone Sheet
Durostone Sheet,Durostone Sheet Price,Cheap Durostone Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com