In terms of meaning, anti-static floor and anti-static floor are only one word, one is anti-, the other is anti-. In terms of people's inertial thinking, prevention has the meaning of prevention, and resistance is confrontation. The meaning of the word is different. Therefore, many people have such questions. Is the anti-static floor the same as the anti-static floor? Or, anti-static floor and anti-static floor have been considered completely different, and their effectiveness is certainly not the same. In fact, otherwise, anti-static floor is the same as anti-static floor, anti-static floor is anti-static floor, but some People used to call it anti-static floor, and some people used to call anti-static floor, so that there will be such a question. Here is a simple anti-static floor what effect and its scope of application Anti-static flooring, also known as anti-static floor, also known as The dissipative static floor is a floor that can dissipate charge when grounded or connected to any lower potential point. It is called antistatic floor in foreign countries and is divided into conductive static type and static dissipative type according to the surface resistance value. According to different environments, anti-static flooring has different products to meet its purpose of preventing static electricity, such as three anti-static raised floor, all-steel anti-static raised floor, composite anti-static floor, aluminum alloy anti-static floor, etc. The unique use can effectively prevent the existence of invisible killer static electricity and reduce the harm caused by static electricity. Anti-static moving plate has a wide range of applications, such as microelectronics industry, computer, communication and electronic equipment manufacturing, hospital operating room, anesthesia room, oxygen bar, etc., especially in some factories, electronics factories, computer rooms, etc. There is a large amount of static electricity in the surrounding environment. Static electricity will cause certain harm to the surrounding electronic products. It is not only a hazard to the machine and the instrument, but also the excessive static electricity is a threat to the human body. Therefore, the fight against static electricity has become an electronics factory. , Computer rooms and other important non-negligible things, so after continuous research and technology introduction, anti-static flooring came into being, so that in those special occasions, static electricity problems will be effectively resolved. At the same time, the floor market has expanded a lot and the market share has increased.
Overshot Assembly
Overshot go into the heart of the drill pipe, the slider move up, make the tube socket head can be inserted into the center, when on the slider move up tight, using friction lift drill, remove loose again after the slider, by means of the connection string to slide along the block should tighten, set aside the center pipe, but in front of the salvage must first determine the bit in the bottom of the hole position, can be in a thin plate with bolts tight end of drill pipe, Drop the drill pipe to the bottom of the hole and press it on the drill bit. After waiting for a moment, it is proposed that the relative position of the drill bit at the bottom of the hole and the center of the rotary plate of the drill can be determined by observing the indentation left by the center pipe of the drill bit on the board, and then move the drill or rotary plate so that the center of the rotary plate is directly in front of the center pipe of the injured head, so as to ensure that the fishing device can be inserted into the center pipe accurately.
Overshot Assembly,Fishing Tools,Overshot Assembly For Sale,Overshot Fishing Assembly
wuxi shengmeirun trading co.,ltd. , https://www.wxsmrxz.com