According to relevant statistics, in China's market for building doors and windows, aluminum doors and windows products account for the largest proportion, 55%; followed by plastic doors and windows, accounting for 35%; steel doors and windows products have a 6% share; other materials Products account for the remaining 4%.
Industry analysts believe that the reason why aluminum alloy doors and windows occupy the largest proportion of market share is due to the wide range of aluminum alloy door and window product development in a wide range of cities and towns in China.
Although the quality of aluminum alloy products has been questioned by ordinary people for a certain period of time or in some areas, due to the limited living standards of the people in the country and the constraints of economic conditions, aluminum doors and windows are still their preferred products among a considerable number of consumers.
Although most of the aluminum doors and windows are still aluminum sheets installed in single-layer glass, aluminum doors and windows with broken glass in the hollow window account for less than 20% of the total aluminum window market. Aluminum doors and windows still occupy building doors and windows. Half of the market's mountains.
For 6% of the steel doors and windows product composition, the industry sources said: Some fire doors, factory gates, including security doors and color steel plate production, are attributed to the steel door products. In addition, due to the phenomenon of using steel windows in some rural areas, solid steel windows or fasting steel windows that were seen in the past are still produced in some areas, but the number is not large.
Plastic door and window products are emerging architectural doors and windows products developed under the support of national industrial policies. After 20 years of development, various products have entered millions of households. However, due to the increase in raw material prices and the irregular behavior of some operators, the plastic window and door industry is now facing a severe test.
In recent years, the average consumer has been at a loss as to what topics, such as aluminum and plastic door products, are good or bad for real estate developers and some architectural design departments. Is not it? The earlier aluminum alloy doors and windows just came out, compared to earlier solid steel windows and fasting steel windows, light and beautiful decoration does attract many consumers. However, with the passage of time, the trials of snow, rain, and rain in spring, summer, autumn and winter, the original defects of aluminum alloy doors and windows have been exposed, especially the strong thermal conductivity, the poor insulation of the defects make people complain.
Later, plastic doors and windows appeared, and it was a round of consumer boom. Plastic doors and windows were once one of the essential products for high-end residential decoration. However, a good flower is not always open, and good times are not always present. An emerging product that was quite good at the time actually fell into the dilemma of being convinced. Raw material prices will have to fall, otherwise consumers will leave. In addition, the aluminum alloy doors and windows at this time have come back, with the heat-breaking bridge technology and color appearance coupled with insulating glass, to solve the drawbacks of many performance, has become synonymous with high-end doors and windows.
“But we believe that with the strengthening of the country’s economic strength and the improvement of people’s living standards, the people have money and naturally have a demand for good doors and windows. The key to a good product is whether or not there is a consumer, and a few thousand dollars and one square are certainly positive. It's not the same thing as a few hundred dollars a square."
Then in the face of this question, most people in the industry believe that: "The two products have their own advantages and disadvantages, you can't treat yourself better, as long as you do a good job can become a good product."
Industry analysts believe that the reason why aluminum alloy doors and windows occupy the largest proportion of market share is due to the wide range of aluminum alloy door and window product development in a wide range of cities and towns in China.
Although the quality of aluminum alloy products has been questioned by ordinary people for a certain period of time or in some areas, due to the limited living standards of the people in the country and the constraints of economic conditions, aluminum doors and windows are still their preferred products among a considerable number of consumers.
Although most of the aluminum doors and windows are still aluminum sheets installed in single-layer glass, aluminum doors and windows with broken glass in the hollow window account for less than 20% of the total aluminum window market. Aluminum doors and windows still occupy building doors and windows. Half of the market's mountains.
For 6% of the steel doors and windows product composition, the industry sources said: Some fire doors, factory gates, including security doors and color steel plate production, are attributed to the steel door products. In addition, due to the phenomenon of using steel windows in some rural areas, solid steel windows or fasting steel windows that were seen in the past are still produced in some areas, but the number is not large.
Plastic door and window products are emerging architectural doors and windows products developed under the support of national industrial policies. After 20 years of development, various products have entered millions of households. However, due to the increase in raw material prices and the irregular behavior of some operators, the plastic window and door industry is now facing a severe test.
In recent years, the average consumer has been at a loss as to what topics, such as aluminum and plastic door products, are good or bad for real estate developers and some architectural design departments. Is not it? The earlier aluminum alloy doors and windows just came out, compared to earlier solid steel windows and fasting steel windows, light and beautiful decoration does attract many consumers. However, with the passage of time, the trials of snow, rain, and rain in spring, summer, autumn and winter, the original defects of aluminum alloy doors and windows have been exposed, especially the strong thermal conductivity, the poor insulation of the defects make people complain.
Later, plastic doors and windows appeared, and it was a round of consumer boom. Plastic doors and windows were once one of the essential products for high-end residential decoration. However, a good flower is not always open, and good times are not always present. An emerging product that was quite good at the time actually fell into the dilemma of being convinced. Raw material prices will have to fall, otherwise consumers will leave. In addition, the aluminum alloy doors and windows at this time have come back, with the heat-breaking bridge technology and color appearance coupled with insulating glass, to solve the drawbacks of many performance, has become synonymous with high-end doors and windows.
“But we believe that with the strengthening of the country’s economic strength and the improvement of people’s living standards, the people have money and naturally have a demand for good doors and windows. The key to a good product is whether or not there is a consumer, and a few thousand dollars and one square are certainly positive. It's not the same thing as a few hundred dollars a square."
Then in the face of this question, most people in the industry believe that: "The two products have their own advantages and disadvantages, you can't treat yourself better, as long as you do a good job can become a good product."
72# Ferro Silicon,Lump Ferro Silicon 72#,72# For Steelmaking,Refractory Mineral Ferro Silicon
NINGXIA HELANSHAN METALLURGY CO., LTD. , http://www.nxhlsyjferrosilicon.com