1. Fluid used: compressed air 2. Freezing pressure: 6 kg/cm² 3. Maximum operating pressure: 7 kg/cm² 4. Ambient temperature range: 0°C to 80°C 5. Lubricating oil: must use clean 30-weight engine oil. 6. Continuous operation is possible, but not at high speeds. 7. Recommended speed: no more than 80% of the maximum speed. A. If the mixing shaft and stirring blade of the air motor mixer are mismatched, it can lead to poor performance or failure. B. The most common cause of air motor failure is the presence of moisture or dust. Before connecting the air line, ensure that the air is filtered through an air cleaning tube. Avoid letting metal shavings, pieces of sealing tape, dust, or rust enter the air system. C. It is recommended to install auxiliary components such as air filters, air dryers, lubricators, and flow valves as close to the air motor as possible for optimal performance. D. The air supply line must include an air filter, a cold dryer, and an air lubricator. Use clean 30-weight oil in the lubricator, applying 1–2 drops per minute. E. Direct air pressure supply may result in unstable pressure, leading to inconsistent power, torque, or RPM. Always use an air pressure regulator to maintain stability. F. All air pressure equipment (such as filters, dryers, lubricators, and control valves) should be sized according to the air motor's consumption requirements. G. To control and stabilize the speed of the air motor, adjustments should be made on the air supply side, ensuring no back pressure on the exhaust side. H. During testing, gradually increase the motor speed using the air control valve to reach the desired RPM. Prolonged high-speed operation can damage the motor and reduce its lifespan. Always operate within the correct pressure limits. Maintenance Tips: A. Regularly check the air lubricator on the air supply line. If it has lost its effectiveness, replace it immediately. B. Inspect all connections and seals for wear or leaks. Ensure that the air motor is properly grounded to avoid electrical hazards. C. Keep the area around the motor clean and free from debris to prevent contamination. D. Follow the manufacturer’s guidelines for periodic maintenance and servicing. E. If the motor experiences unusual noises or vibrations, stop the operation immediately and perform a thorough inspection. F. Always turn off the air supply before performing any maintenance or repairs. G. Maintain a log of all maintenance activities and operational parameters to help identify potential issues early. H. Store the air motor in a dry, cool place when not in use to prevent corrosion and damage. |
Belleville Washer NFE 25-511 M
Serrated conical washers,Stainless Steel serrated conical washers,M8 Serrated conical washers,Zinc Plated Belleville washer automobile
Ningbo Yinzhou Zhenhua Stamping Co., Ltd. , https://www.fastenersstamping.com