The high pole lamp  generally refers to the street lamp above 15 meters. According to the ambient lighting needs, the high pole lamp has more than 25 meters. The high pole lamp belongs to the non-standard product. His price is difficult to subdivide. Generally, a high pole production is completed. The following steps:
1. Provide the size of the site to be irradiated. 高 Configure the high pole lamp by the manufacturer and set the cooperation factory.
2. According to the manufacturer's foundation, the foundation construction, pitting, wiring, filling
3, with the manufacturer to install, no need to provide a crane
4, acceptance
The price of a high pole light is generally determined by the following:
1Material selectionThe ​​size and height of the high pole lamp itself
2 galvanized spray also costs money
3  choice of light source, what brand of light source  Philips or Yaming  to several lamps 
4      还是 or the UFO åœ°çƒ or the globe, etc.
5 Processing costs, electricity costs, etc.
The above is the factor that affects the price of high pole lights. If you need to install it, you need to consider the installation cost. The materials needed for laying, crane, and installation are like buying the ground-based concrete, shipping the concrete, and so on.
Gaoyou Continental Lighting is a professional manufacturer of high pole lights and high pole lights, providing you with the most cost-effective high pole light products. For details, please visit:
Special Epoxy Stop Slurry Floor (no vibration stops)
Scope of adaptation:
Particularly suitable for water, oil and other ground, and all the non-slip requirements of the ground, such as access, corridors, staircases, underground parking ramps and so on.
Performance characteristics:
1, made of epoxy resin plus high quality Curing Agent;
2, rough surface effect, patterns can be large or small;
3, acid, alkali, salt and oil corrosion;
4, wear, pressure, impact resistance.
Service life:
Thickness of 1 ~ 5mm above, the service life of more than 5 years.
Construction Technology:
1, surface treatment;
2, brushing primer;
3, Scratch-resistant non-slip mortar, sand sprinkle;
4, brush wear-resisting finish varnish.
Technical index:
|
project |
index |
|
|
Drying time,h |
Table dry |
≤4 |
|
action |
≤24 |
|
|
Tensile Strength |
≥9 |
|
|
Bending strength |
≥7 |
|
|
Compressive strength |
≥80 |
|
|
Shore strength |
≥80 |
|
|
Wear resistance(750g/500r,weightlessness,g) |
≤0.03 |
|
|
Adhesive strength |
≥2 |
|
|
30% resistant to sulfuric acid |
30 days to allow a slight discoloration |
|
|
25% resistant to sodium hydroxide |
30 days without exception |
|
|
30% resistant to salt water |
30 days without exception |
|
|
Gas-resistant |
Resistance |
|
Special Epoxy Stop Slurry Floor
Special Epoxy Stop Slurry Floor,Special Epoxy Slipping Mortar Floor,Epoxy Mortar Antiskid Floor,Parking Epoxy Stop Slurry Floor
Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com