Model NO.: Ni46
State: Soft State
Size: 1.2mm
Features: Wear Resistant High Permeability Soft Magnetic All
Name: Ni65mo2
Density: 8.2
Curie Point: 400
Resisivity: 0.45
Trademark: HUONA
Transport Package: Wooden Case
Specification: 0.7mm
Origin: Shanghai
HS Code: 75062000
Model NO.: Ni46
State: Soft State
Size: 1.2mm
Features: Wear Resistant High Permeability Soft Magnetic All
Name: Ni65mo2
Density: 8.2
Curie Point: 400
Resisivity: 0.45
Trademark: HUONA
Transport Package: Wooden Case
Specification: 0.7mm
Origin: Shanghai
HS Code: 75062000
Ni46 Soft Magnetic Alloy Wire E11e wire
medium permeability of medium magnetic saturation soft magnetic alloy
This kind of alloy of nickel content in 45% ~ 50%.The saturated magnetic induction intensity from 1 to 1.5 T, higher than that of high permeability alloy under high magnetic saturation alloy, its permeability and coercive force between the two types of alloys.Mainly used for the secondary magnetic field work of all kinds of transformers, relays, electromagnetic clutch, iron core, the resistivity of this kind of alloy of high magnetic full alloy than the high resistivity, and thus can be applied to high frequency.
Chemical composition
| composition | C | P | S | Mn | Si |
| ≤ | |||||
| Content(%) | 0.03 | 0.02 | 0.02 | 0.6~1.0 | 0.15~0.3 |
| composition | Ni | Cr | Mo | Cu | Fe |
| Content(%) | 45.0~46.5 | - | - | 0.2 | Bal |
| Shop sign | Melting point (ºC) |
Resistivity (μΩ·m) |
Density (g/cm³) |
Curie point (ºC) |
Saturation magnetostriction coefficient  (10-6)  |
| 1j46 | 10.9~11.2 | 0.56 | 8.75 | 400 | 0.5 |
Heat treatment system
| shop sign | Annealing medium | heating temperature | Keep the temperature time/h | Cooling rate |
| Â 1j46 |
Dry hydrogen or vacuum, pressure is not greater than 0.1 Pa | Along with the furnace heating up 1100~1200ºC |  3~6 |
In 100 ~ 200 ºC / h speed cooling to 600 ºC, fast to 300 ºC draw a charge |
USES: most used in weak magnetic or secondary magnetic field work of small transformer, pulse transformer, relays, transformers, magnetic amplifier, electromagnetic clutch, the reactor core and magnetic shielding.
Soft magnetic alloy are in weak magnetic field with high permeability and low coercive force of alloys.This kind of alloy are widely used in radio electronics, precision instruments and meters, remote control and automatic control system, the combination is mainly used for energy conversion and information processing, the two aspects of is an important material in the national economy.
2.UsageÂ
It is mostly used in small transformers, pulse transformers, relays, transformer, magnetic amplifier, electromagnetic clutch,the reactor coreand magnetic shielding which work inweak magnetic orsecondary magnetic field.
Â
3.FeaturesÂ
1).Low coercivity and magnetic hysteresis loss;
2).High resistivity and loweddy-currentloss;
3).High initialmagnetic permeability and maximum magnetic permeability;
4).High saturation magnetic flux density;
Â
4. Packing detail
Â
 1). Coil (plastic spool) + compressed ply-wooden case + palletÂ
 2). Coil (plastic spool) + carton + pallet Â
 5. Products and services
Â
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Fast delivery;
Â
Ni46 Soft Magnetic Alloy Wire E11e wire
medium permeability of medium magnetic saturation soft magnetic alloy
This kind of alloy of nickel content in 45% ~ 50%.The saturated magnetic induction intensity from 1 to 1.5 T, higher than that of high permeability alloy under high magnetic saturation alloy, its permeability and coercive force between the two types of alloys.Mainly used for the secondary magnetic field work of all kinds of transformers, relays, electromagnetic clutch, iron core, the resistivity of this kind of alloy of high magnetic full alloy than the high resistivity, and thus can be applied to high frequency.
Chemical composition
| composition | C | P | S | Mn | Si |
| ≤ | |||||
| Content(%) | 0.03 | 0.02 | 0.02 | 0.6~1.0 | 0.15~0.3 |
| composition | Ni | Cr | Mo | Cu | Fe |
| Content(%) | 45.0~46.5 | - | - | 0.2 | Bal |
| Shop sign | Melting point (ºC) |
Resistivity (μΩ·m) |
Density (g/cm³) |
Curie point (ºC) |
Saturation magnetostriction coefficient  (10-6)  |
| 1j46 | 10.9~11.2 | 0.56 | 8.75 | 400 | 0.5 |
Heat treatment system
| shop sign | Annealing medium | heating temperature | Keep the temperature time/h | Cooling rate |
| Â 1j46 |
Dry hydrogen or vacuum, pressure is not greater than 0.1 Pa | Along with the furnace heating up 1100~1200ºC |  3~6 |
In 100 ~ 200 ºC / h speed cooling to 600 ºC, fast to 300 ºC draw a charge |
USES: most used in weak magnetic or secondary magnetic field work of small transformer, pulse transformer, relays, transformers, magnetic amplifier, electromagnetic clutch, the reactor core and magnetic shielding.
Soft magnetic alloy are in weak magnetic field with high permeability and low coercive force of alloys.This kind of alloy are widely used in radio electronics, precision instruments and meters, remote control and automatic control system, the combination is mainly used for energy conversion and information processing, the two aspects of is an important material in the national economy.
2.UsageÂ
It is mostly used in small transformers, pulse transformers, relays, transformer, magnetic amplifier, electromagnetic clutch,the reactor coreand magnetic shielding which work inweak magnetic orsecondary magnetic field.
Â
3.FeaturesÂ
1).Low coercivity and magnetic hysteresis loss;
2).High resistivity and loweddy-currentloss;
3).High initialmagnetic permeability and maximum magnetic permeability;
4).High saturation magnetic flux density;
Â
4. Packing detail
Â
 1). Coil (plastic spool) + compressed ply-wooden case + palletÂ
 2). Coil (plastic spool) + carton + pallet Â
 5. Products and services
Â
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Fast delivery;
Â
Steel poles are commonly used to carry several types of electric power lines, distribution lines and lighting system. Distribution lines carry power from local substations to customers. They generally carry voltages from 4.6 to 33kV for distances up to 30 miles, and include transformers to step the voltage down from the primary voltage to the lower secondary voltage used by the customer. A service drop carries this lower voltage to the customer's premises.
Traffic Pole,Galvanized Steel Traffic Pole,High Quality Traffic Pole,Traffic light Pole
Yixing Steel Pole International Trading Co., Ltd , http://www.yx-steelpole.com