Floor tiles are the most common decorative building materials on the ground. Paving of floor tiles is generally carried out in the mud and wood stage. Many homebuyers are laymen. Naturally, there are doubts about how to lay out the floor tiles . Today we have the following content together to learn about how to lay tile under it!
How to Spread Floor Tiles - Preparation
Before laying the floor tiles, it is necessary to pre-number the floor tiles according to the floor design drawings and design requirements. In the process, the broken tiles are picked out, which facilitates the later laying of the floor tiles. If the floor tiles come into play, you need to tidy up the tiles one by one and sort them out. Take care that they should be placed in a safe area to avoid damage.
How to spread the floor tiles - soaked tiles
Before laying the floor tiles, the tiles should also be soaked in a water basin, generally for more than two hours until the tiles do not bubble. The purpose of doing so is to absorb the moisture of other materials during the process of laying, resulting in poor adhesion of floor tiles, and it is prone to problems such as hollowing and falling off. At the same time, on the ground floor, dust and debris need to be cleaned and wetted with water to reduce the generation of dust on the ground and allow the ground to absorb some moisture.
How to spread the floor tile - plan the horizontal line
Before laying the floor tiles, horizontal leveling should be done on the walls around the space, and vertical lines should be fixed in place so that the wall size of the floor tiles can be determined. Then determine the position of the horizontal line, this operation so that the floor tile can be laid horizontally and vertically. When laying, it is necessary to use a horizontal line as a reference, and a support board is provided to prevent the floor tile from moving without reaching the adhesiveness.
How to spread the floor tile - paving construction
When the floor tiles start to be laid, they should start from left to right and start from the position of the doors and windows. Use a spatula to evenly spread the cement mortar on the back of the floor tile, gently tile the tile on the ground floor, and tap gently with a rubber mallet to make the cement mortar more uniform and fit the ground.
How to lay floor tiles - inspection leveling
When constructing a row of floor tiles, you can use the ruler to level the floor. If it is not flat, you can put some wood pieces under the tiles. If the tile is high, you can use a rubber mallet to lightly tap it to make the cement mortar on the back more uniform.
How to spread the floor tile - hooking clean
After the laying of the floor tiles, the excess mortar of the cement mortar should be wiped off with a cotton cloth in a timely manner. After one day of drying, the jointing treatment should be performed again. The impurities should be removed first, and then the sealing joint construction should be performed.
With regard to how the floor tiles are laid out , Xiao Bian introduced them here for the time being, hoping to help you. If you want to learn more about floor tiles, you can pay attention to the information on this site and more exciting content waiting for you.
How to spread the floor tile floor tile
Stainless Steel Wine Rack/holder
Wine Bottle Rack,Metal Wine Rack,Wine Display Rack,Wine Rack Holder,Honeycomb Wine Rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.szlanejoy.com