for Waterproof Spraying Paint Quick-Setting Rubber Bituminous Waterproofing Coatings

Spray high speed rubber asphalt waterproof coating, keeping 50years.



Two-component coating for quick setting rubber bituminous waterproofing,A component of the main agent, made of anionic synthetic rubber emulsion, emulsified asphalt microemulsion made with special process and a variety of chemical auxiliaries,This component is a core shell structure composed of rubber as continuous phase and asphalt as dispersed phase. B component is a coagulant, which is an aqueous solution of corresponding concentration prepared from electrolytes such as metal salts.
Film-forming mechanism
Part A and part B of the spraying quick-setting rubber asphalt waterproof coating are sprayed through two nozzles in the airless spraying equipment respectively, and then sprayed to the base surface in fan-shaped high-speed spraying, atomization, cross collision and mixed spraying.Under the action of coagulant, the main agent destroys the charge stability of polymer emulsion and emulsified asphalt, causing it to break up quickly, salt out of water and condense into polymer film.
Range of application
The product can be widely used in building foundation, kitchen and bathroom and roof waterproof, all kinds of water storage tanks, subway, tunnel and culvert, water conservancy facilities, road and bridge waterproof and lining. And caigang tile, roof and many other steel structure protection.
Product features:
1. Adopt spraying technology with high efficiency and simple and convenient construction.
2. Strong adaptability to the base course, which can be used on the base course of reinforced concrete, pressing steel plate, plastics and various masonry materials.
3. The surface treatment of spray coating is simple, without special requirements, no leveling layer can be made, and it can be directly applied when the humidity is less than 80%.
4. Free of volatile organic compounds, non-toxic and tasteless, no waste gas emissions, and no pollution to the environment, which can be applied to closed Spaces.
5.The coating has excellent weather resistance, acid and alkali resistance and aging resistance. 6.Applicable life is over 50 years, it can be used under the environment of no less than 5 degrees Celsius. Superior anti - stripping, anti - puncture ability.
7.It can be molded within 3 to 5 seconds after spraying, and can be trampled, and has over 15 times ductility, 95% resilience, and effective sound insulation.
8.Strong puncture resistance, the material has rubber, good ductility.
9.Excellent chemical resistance and temperature resistance.
Technical data:
Product construction technology
The construction spraying of the product is completed by special spraying equipment. Under normal temperature, the two components of the product are respectively sprayed by two nozzles through the pipe to atomize and mix at high speed. The material is immediately condensed into film after being sprayed to the base surface.
low
Grassroots processing:
The base should be clean and solid, free from floating ash, oil stains and sundries, and the surface smoothness should conform to relevant standards;
low
Coating construction:
The distance between the spray gun and the base surface should be 600 ~ 800mm, and the coating thickness of 1.5mm ~ 2mm can be finished by cross spraying for 4 ~ 5 times.
Scope of construction
Roof: concrete flat, inclined roof, gutter, awning and various irregular roof.
Underground construction: concrete inner wall, external wall, ground, elevator pit, underground tunnel, cable well, outside waterproof pipe.
Floor building: toilet, kitchen, roof garden, reservoir.
Joints: expansion joints, construction joints, settlement joints, through wall pipe, water inlet.
Packing, transportation and storage
1. Packaging: the product shall be sealed with iron barrels with covers, and the packaging specifications are generally 5kg/ barrel, 10kg/ barrel and 20kg/ barrel.
2. Transportation and storage, different categories of products shall be packed separately, avoid sharp, close to the fire, to prevent the collision, pay attention to ventilation, storage temperature 0 ºC ~ 40 ºC. No diluents shall be added.
3. Under normal storage and transportation conditions, the storage period is 6 months.







  Spray high speed rubber asphalt waterproof coating, keeping 50years.



Two-component coating for quick setting rubber bituminous waterproofing,A component of the main agent, made of anionic synthetic rubber emulsion, emulsified asphalt microemulsion made with special process and a variety of chemical auxiliaries,This component is a core shell structure composed of rubber as continuous phase and asphalt as dispersed phase. B component is a coagulant, which is an aqueous solution of corresponding concentration prepared from electrolytes such as metal salts.
Film-forming mechanism
Part A and part B of the spraying quick-setting rubber asphalt waterproof coating are sprayed through two nozzles in the airless spraying equipment respectively, and then sprayed to the base surface in fan-shaped high-speed spraying, atomization, cross collision and mixed spraying.Under the action of coagulant, the main agent destroys the charge stability of polymer emulsion and emulsified asphalt, causing it to break up quickly, salt out of water and condense into polymer film.
Range of application
The product can be widely used in building foundation, kitchen and bathroom and roof waterproof, all kinds of water storage tanks, subway, tunnel and culvert, water conservancy facilities, road and bridge waterproof and lining. And caigang tile, roof and many other steel structure protection.
Product features:
1. Adopt spraying technology with high efficiency and simple and convenient construction.
2. Strong adaptability to the base course, which can be used on the base course of reinforced concrete, pressing steel plate, plastics and various masonry materials.
3. The surface treatment of spray coating is simple, without special requirements, no leveling layer can be made, and it can be directly applied when the humidity is less than 80%.
4. Free of volatile organic compounds, non-toxic and tasteless, no waste gas emissions, and no pollution to the environment, which can be applied to closed Spaces.
5.The coating has excellent weather resistance, acid and alkali resistance and aging resistance. 6.Applicable life is over 50 years, it can be used under the environment of no less than 5 degrees Celsius. Superior anti - stripping, anti - puncture ability.
7.It can be molded within 3 to 5 seconds after spraying, and can be trampled, and has over 15 times ductility, 95% resilience, and effective sound insulation.
8.Strong puncture resistance, the material has rubber, good ductility.
9.Excellent chemical resistance and temperature resistance.
Technical data:
Product construction technology
The construction spraying of the product is completed by special spraying equipment. Under normal temperature, the two components of the product are respectively sprayed by two nozzles through the pipe to atomize and mix at high speed. The material is immediately condensed into film after being sprayed to the base surface.
low
Grassroots processing:
The base should be clean and solid, free from floating ash, oil stains and sundries, and the surface smoothness should conform to relevant standards;
low
Coating construction:
The distance between the spray gun and the base surface should be 600 ~ 800mm, and the coating thickness of 1.5mm ~ 2mm can be finished by cross spraying for 4 ~ 5 times.
Scope of construction
Roof: concrete flat, inclined roof, gutter, awning and various irregular roof.
Underground construction: concrete inner wall, external wall, ground, elevator pit, underground tunnel, cable well, outside waterproof pipe.
Floor building: toilet, kitchen, roof garden, reservoir.
Joints: expansion joints, construction joints, settlement joints, through wall pipe, water inlet.
Packing, transportation and storage
1. Packaging: the product shall be sealed with iron barrels with covers, and the packaging specifications are generally 5kg/ barrel, 10kg/ barrel and 20kg/ barrel.
2. Transportation and storage, different categories of products shall be packed separately, avoid sharp, close to the fire, to prevent the collision, pay attention to ventilation, storage temperature 0 ºC ~ 40 ºC. No diluents shall be added.
3. Under normal storage and transportation conditions, the storage period is 6 months.







 

Three Wire Plastic Copper Coextrusion

Three Wire Plastic Copper Coextrusion,Plastic Copper Coextrusion,4 Wire Pvc And Copper Co-Extrusion,Copper And Plastic Coextrusion

Farwise Technology Co.,Ltd. , https://www.farwiselighting.com