Tips for buying homes: three methods to eliminate the worries of home inspection

Selecting houses, talking about prices, and staying in the apartment seems to have become an inertial way of thinking about homebuyers. Although this “three-year old” has already caused homebuyers to be extremely busy, there is still a work that is most closely related to the buyers who lived in. However, it has never been noticed by the people. This is the “home inspection” before the stay. Especially in the era of rough houses, when the house of your choice is completely exposed to your own eyes, the developer waits for you to sign and take the key, examines your house in detail, so as not to put an end to the “frustrating” displeasure of the future, it seems that More important. In order to allow more consumers to take this "home inspection," the reporter collected some information in order to remind buyers to take extra care when checking in. Do not scribble on the house and sign it, so that the problem is found after renovation. Developers find excuses to push responsibility.

One of the ways: look at the big three things

Check the house for cracks. First of all, you should carefully check the ground and the cracks on the roof of the owner's bedroom and living room near the terrace. There is no best crack. If there is a crack, it depends on what kind of crack it is. Generally speaking, the cracks parallel to the room beam are quality problems, but there is basically no danger. Repair will not hinder the use. If the crack is at an angle of 45 degrees with the corner of the wall or perpendicular to the beam, the settlement of the house is serious and there is a structural quality problem. Secondly, if there are cracks on both sides of the terrace, if there are cracks, it is a serious quality problem. Finally, see if there is a crack in the bearing wall. If the crack runs through the wall and penetrates behind, it indicates that there is a hidden danger in the house. For this kind of house, the buyer must not report fortunes.

Check whether the house is tilted. Although the use of special instruments is required to detect the inclination of a house, buyers can basically find problems by carefully observing the distance from different angles from a different perspective. Sometimes, you can use a thin rope to pick up a heavy object on the roof, put the wall down to the wall, and check its inclination from all sides.

Check the house for leaks. Buyers should pay attention to the ground and the top floor seepage of the house, and carefully inspect the walls of the house for signs of discoloration, blistering, peeling, dust falling, etc. These are signs of leakage. You should also check for leaks at the top of the kitchen, bathroom, balcony, and pipe connections. It is advisable to check the housing after heavy rains have been received. You can ask the property company staff to go there together before handing in the house to put the water in the kitchen and toilet. After two days, check if there is any leakage.

Method two: Do ​​not worry about detailed investigation

Look at the "recording" to leave "two books." Before the new home stays, the owner should see a copy of the project's filing documents in order to confirm that the project is a legal building; at the same time, the developer should provide the “Residential Quality Warranty Book” and the “Home Use Instruction”.

The doors and windows are flexible and bright. Try to see if doors and windows can be opened flexibly, visually check if the doors and the door frame, the sides of the window and the window frame are parallel, close the doors and windows to hear the sound insulation effect, and also understand the degree of their sealing. However, the door of the bathroom does not require strict seams. In order to waterproof, it is specified that the bottom must be 1.5 cm above the ground.

The quality of paint on doors and windows depends mainly on whether there is a falling stream (a trace of paint dripping). The top of each door must be painted and the door of the bathroom must be brushed on the other side.

Tap on each side to hear cracks. Whether there is cracking in the plastering of the wall, the floor decorative surface layer and other decorative surface layers, just use a small hammer to gently knock. If you hear the voice of “empty”, it means that each surface layer is in contact with the wall (ground) surface and needs to be reworked; if you hear a dull knock, it means that they are in good contact.

Top occupants check for rain. If you are buying the top floor, be sure to check the top surface of each house for signs of rain leakage. Because according to the construction requirements, the houses handed over have either passed the “test” of two heavy rains, or the construction party has conducted rain tests under the supervision of the supervision unit.

Large cracks in the balcony. In general, the cracks in the wall are mostly not structural cracks, affecting the appearance, but the danger is not great. Problems with the structure of the house often appear on the balcony. If there is a crack in the connection between the room and the balcony, it is likely to be a sign of the breakage of the balcony. The relevant unit must be notified immediately.

Insulation is not good wall dripping. In winter, if there is condensation in the walls of the room (similar to the summer iced bottle beer and water droplets appearing on the outside wall at room temperature), there must be a problem with the wall insulation.

Open the tap to check for leaks. The upper and lower water pipes have no seepage, leakage, or blockage. Open the water tap and notice that, as far as possible, let the water flow be a little bigger and anxious. Let's take a look at the water pressure and try the drainage speed.

Heating pipe has a slope. The heating supply and return branch pipes are not horizontally arranged. The water supply branch pipe is connected to the water pipe at the end higher than the end that connects the radiator. The water return branch pipe has the opposite height at both ends. This slope is proportional to the length of the two branch pipes. Generally 1% difference per meter.

Heating pipe to be casing. The heating pipeline shall be provided with a casing through the wall and through the floor (in the intersection of the pipeline and the wall or floor, a small pipe shall be put on the pipeline). The casing on the ground shall be 2-3 cm above the ground, and the ground shall be The decoration should be 5 cm above the ground. Its role is to prevent the heating pipes from swelling and shrunk and then arching the walls and floors.

It is essential to turn off the power. When the gate and meter are outdoors, they should check whether they can control the indoor lamps and the indoor outlets. After the gate is turned on, whether the indoor power is completely turned off; if the gate is open, the gates should also be checked separately. Control each branch line.

Insurance outlets protect young children. In order to prevent young children from putting their fingers into the socket, the socket must be equipped with a safety device that is located at a height of 30 cm from the ground.

Bathroom socket rules more. The power outlet in the bathroom should be a moisture-proof outlet

Home inspection balcony house outlet window heating paint decoration living room bedroom soundproof master bedroom decoration bathroom waterproof bathroom waterproof price bathroom door bedroom bedroom bedroom lamp

Jig Saws

Electric Saw Co., Ltd. , http://www.shcleaningtool.com

This entry was posted in on