First, the general
The rapid development of the iron and steel industry has made important contributions to safeguarding the sound and rapid development of China's national economy. However, there is still excessive capacity growth, low industrial concentration, unreasonable layout, slow elimination and backwardness, and irregular iron ore business order. Outstanding issue.
In order to further strengthen the management of the steel industry and standardize the order of production and operation of existing iron and steel enterprises, according to the “Several Opinions of the General Office of the State Council on Further Enlarging the Energy Saving and Emission Reduction and Accelerating Structural Adjustment of the Steel Industry†and related laws and regulations, the “Steel Industry Production and Management†has been formulated. "Regulations", which regulates the production and operation of existing enterprises in the iron and steel industry, and serves as a basis for the authorities to approve or file projects, allocate resources, issue building steel production licenses, regulate iron ore business order, and promote the elimination of outdated steel production capacity. . The iron and steel industry's production and operation standards should be combined with mergers and acquisitions, elimination of backwardness and other work, gradually reduce the number of iron and steel enterprises, reduce the proportion of backward production capacity, and improve and perfect industry management.
The condition of this specification is a basic condition for the production and operation of the existing iron and steel industry. It is a transitional standard that meets the current level of development of China's steel industry, and will continue to increase as the overall level of China's steel industry increases. For the iron and steel industry construction and transformation projects to achieve higher access standards, it is necessary to follow the relevant requirements of the “Steel Industry Development Policyâ€.
Second, steel industry production and operation specification conditions
product quality
1. Steel enterprises must have a complete quality management system, product quality must meet national and industry standards, and no major product quality accidents occur within two years.
2. Iron and steel enterprises produce products that belong to the national production licensing system and must obtain production licenses for industrial products according to law.
Environmental protection
1. The iron and steel enterprises' iron and steel waste discharges shall not exceed 2.0 cubic meters, the emissions of tons of steel smoke shall not exceed 1.0 kg, and the emissions of tons of steel dioxide* shall not exceed 1.8 kg.
2. The iron and steel enterprises must implement the EIA approval and “three simultaneous†systems in accordance with law. If the construction project has not been approved by the EIA, the EIA approval procedure must be submitted. The company must have a sound environmental protection management system, complete with complete pollutant emission monitoring and control facilities, install an automatic monitoring system and be networked with local environmental protection agencies.
3. The iron and steel enterprises shall discharge pollutants and meet the discharge standards with certificates. No major environmental pollution accidents occurred within two years; the discharge of water and air pollutants conforms to the relevant provisions of national and local pollutant discharge standards, and the solid waste pollution control shall comply with the national solid waste pollution control. The relevant provisions of the standard, hazardous waste disposal according to law; total corporate pollutant emissions must comply with the total amount of control indicators approved by the environmental protection department. If a company has the task of reducing emissions of major pollutants, it shall implement measures to reduce the total amount of major pollutants and meet the requirements of total emission reduction targets.
4. The environmental protection requirements that other laws and regulations must meet.
Energy consumption and comprehensive utilization of resources
1. Steel companies must have a sound energy management system equipped with the necessary energy measurement instruments. Conditional companies must establish energy management centers.
2. The energy consumption index of the main production processes of iron and steel enterprises shall meet the requirements of the “energy consumption limit for unit production of major processes of crude steel production†and the “energy consumption limit for coke per unit productâ€, among which the coking process energy consumption is ≤ 155 kg standard coal/ton, and the sintering process energy Consumption ≤56 kg standard coal/ton, blast furnace process energy consumption ≤ 446 kg standard coal/ton, converter process energy consumption ≤0 kg standard coal/ton, energy consumption of Pu Gang electric furnace process ≤92 kg standard coal/ton, special steel furnace Process energy consumption ≤ 171 kg standard coal / ton. The new water consumption per ton of steel does not exceed 5 tons. The comprehensive utilization rate of blast furnace slag is not less than 97%, the converter slag is not less than 60%, and the electric slag is not less than 50%.
Process and equipment
1. The effective volume of blast furnace is more than 400 cubic meters, the nominal capacity of converter is more than 30 tons, the nominal capacity of electric furnace is more than 30 tons, the area of ​​sintering machine is more than 90 square meters, and the height of coking furnace carbonization chamber is 4.3 meters or more, and it is not a guideline for industrial structure adjustment. Provision for elimination of process equipment; equipment constructed and reformed after the issuance of the “Iron and Steel Industry Development Policy†in July 2005 must meet the equipment entry requirements specified in the “Iron and Steel Industry Development Policy†and does not fall within the limits specified in the Guidance Catalogue for Industrial Structure Adjustment. Process equipment, namely sintering machine use area of ​​180 square meters and above, coke oven carbonization chamber height of 6 meters and above, blast furnace effective volume of 1000 cubic meters and above, converter nominal capacity of 120 tons and above, nominal capacity of electric furnace 70 tons and above. The blast furnace shall be equipped with a pulverized coal injection and residual pressure power generation device, and the coke oven, blast furnace, and converter shall be equipped with a gas recovery device. The conditional enterprise coke oven shall adopt coal moisture adjustment and CDQ equipment, and the sintering machine shall be equipped with the waste heat recovery and removal device of the flue gas, and the regenerative heating furnace shall be used for steel rolling.
2. The iron and steel enterprises must eliminate backward production equipment within the prescribed time limit in accordance with the requirements of the "Iron and Steel Industry Development Policy", "Steel Industry Adjustment and Revitalization Plan", the State's timely revised "Guidance Catalogue for Industrial Structure Adjustment" and other laws and regulations.
Production scale
In 2009, the output of crude steel of Pu Steel was 1 million tons and above, and that of special steel companies was 300,000 tons and above, and the ratio of alloy steel was greater than 60%.
Safety, health and social responsibility
1. The iron and steel enterprises must meet a series of safety and health laws and regulations such as the "Safety Production Law," "Safety Production Supervision Regulations of Metallurgical Enterprises," and "Hygienic Standards for the Design of Industrial Enterprises," and have a responsibility system for safe production and occupational health, control conditions, and management. In the system, no major safety accident occurred within two years.
2. Iron and steel enterprises may not be in arrears of state taxes and wages of workers, and must pay various social insurance premiums in accordance with relevant state regulations.
Third, the iron and steel industry production and management practices
The Ministry of Industry and Information Technology is responsible for the standardized management of the production and operation of the steel industry. After the relevant departments of the business, it publishes a list of companies meeting the regulatory requirements in the form of announcements and implements social supervision and dynamic management.
Existing iron and steel enterprise production and operation specification application, review and announcement procedures:
1. The existing iron and steel enterprises must be included in the standard management. The iron and steel enterprises that apply for the regulation must prepare the “Application Report for the Steel Industry Production and Operation Regulations†and attach the relevant supporting documents. Local enterprises apply to the Ministry of Industry and Information Technology through the industrial authorities in the region, and the central enterprises directly apply to the Ministry of Industry and Information Technology.
2. The competent industrial departments of provinces, autonomous regions, municipalities directly under the Central Government, and separately listed cities are responsible for accepting standardized applications and preliminary examinations of iron and steel enterprises in the region, and the central enterprises themselves. The preliminary examination or self-examination shall verify the relevant conditions of the enterprise according to the requirements of the specification, submit the opinions of the preliminary examination or self-examination, attach the application materials of the enterprise and the approval documents or certification documents of the relevant land, project approval or record submission to the Ministry of Industry and Information Technology.
3. The Ministry of Environmental Protection is responsible for reviewing the compliance of environmental protection requirements of existing iron and steel enterprises. If it fails to pass the review, the Ministry of Industry and Information Technology will not issue normative announcements. Specific examination methods will be formulated separately by the Ministry of Environmental Protection.
4. After receiving the application, the Ministry of Industry and Information Technology organizes an examination of the application materials and puts forward the review opinions, publicizes the companies that meet the regulatory requirements, and announces them without objection.
The local industrial authorities at all levels shall supervise and inspect the implementation of regulatory conditions in enterprises in the region each year. The central enterprises shall conduct self-inspection, and the Ministry of Industry and Information Technology shall organize the relevant departments to conduct spot checks on the announced companies.
The China Iron and Steel Industry Association assisted the relevant government departments in the implementation of the regulatory conditions. The China Iron and Steel Industry Association and the China Minmetals Import and Export Chamber of Commerce organize enterprises to do a good job of industry self-regulation and strengthen coordination so that iron ore resources can flow to companies that meet the regulatory requirements.
The announcement of the following conditions of the company will cancel its announcement qualifications:
1. Fill in the relevant information with falsification;
2. Refused to accept supervision and inspection;
3. Cannot maintain the specification conditions;
4. Major safety and pollution liability accidents;
5. Violation of laws, regulations, and national industrial policy regulations.
Companies that do not have regulatory requirements must make rectification in accordance with regulatory requirements. Enterprises that do not meet the requirements after rectification should gradually withdraw from steel production.
For enterprises that do not meet the regulatory requirements, the relevant departments will not approve or file new projects, will not allocate new mine resources and land, will not issue new production licenses, and will not provide credit support.
Fourth, attach
The conditions of this specification apply to the existing iron and steel joint and smelting enterprises within the territory of the People's Republic of China.
If the policies, regulations, and standards involved in this specification condition are revised, they will be implemented after revision.
The conditions of this specification shall be implemented as of the date of promulgation, and the Ministry of Industry and Information Technology shall be responsible for interpreting it and make timely revisions in accordance with the development of the industry and the requirements of macro-control.
annex:
Steel Industry Production Management Application Report
Company Name:
Filing date:
Informant:
contact number:
I. Enterprise Overview
Company name, ownership type, registered address, establishment time, legal representative, current number of employees, existing production capacity, actual production, sales revenue, profit, etc., production and operation status in 2009, and approval documents for relevant land and project approval or filing, etc. .
Second, the analysis of regulatory conditions compliance
product quality
1. Description of the company's quality management system, together with the relevant agency certification.
2. The category and applicable standard of steel products of the company, whether there has been a major product quality accident within two years, and the product that belongs to the national production licensing system must be accompanied by an industrial production license.
Energy consumption and comprehensive utilization of resources
1. Description of the enterprise energy management system.
2. Enterprise energy-saving and comprehensive utilization of resources and operating conditions.
3, the enterprise energy consumption and comprehensive utilization of resources compliance.
Process and equipment
1. The existing major equipment of the company, the blast furnace shall be marked with the effective volume and the fan, the converter and the electric furnace shall indicate the nominal capacity and the average steel output, and the electric furnace shall also indicate the transformer capacity.
2. Progress in eliminating outdated production equipment by enterprises.
3. Major equipment, scale and investment of projects under construction by the enterprise.
Safety, health and social responsibility
1. The company's safety production and occupational health management system describes whether there have been major safety incidents within two years and the Safety Production Permit issued by the Provincial Safety Supervision Bureau where the company is located.
2. Enterprises pay taxes and pay employees social insurance.
Third, the rectification measures
When an application stipulates that an enterprise does not fully meet the requirements of the specification when reporting against the production and management specification conditions, the enterprise shall propose rectification measures and expected results, and obtain approval from the provincial-level industrial authority.
Fourth, the conclusion
Comprehensive conclusions on compliance analysis of enterprise specification conditions.