Wall decoration is the focus of home decoration. When using paint to change the color in your home, you should do the following preparations before coating construction:
1. Calculate the painting area.
The painting area measured in the home decoration is only the theoretical area, and a certain surplus is required at the time of purchase. It should also be noted that some characteristics of the coating will also cause the final coating area to deviate from your theoretical area. First of all, the units used by different paints are used in kilograms, some in litres, some in gallons, and some in barrels. It is best not to buy them in barrels. The quality and quantity inside will be different, which is prone to errors. .
2. Good ventilation.
Take necessary protective measures before applying the paint, such as wearing tight overalls, gloves, masks and safety glasses to prevent direct contact with the skin and harmful gases directly into the respiratory system. If you accidentally get your skin stained, wipe it off as soon as possible and wash it off with soap or water.
3, paint construction is best to choose in the dry season, which is conducive to achieve the desired coating effect, and is not prone to lacquer disease.
4. In order to obtain the ideal wall decoration effect, whether it is a new wall or an old wall renovation, it is best to apply a primer first.
5. After the paint is finished, the tools and residual materials should be cleaned in time, and the paint bucket should be closed. The solvent drum should be covered and stored in a cool and ventilated place. For oily coatings, avoid direct sunlight and avoid washing hands with toxic solvents such as solvents with high benzene.
Concerned about surprises
Label: Before the paint is applied, it is necessary to prepare for five points.
Previous: Water-based wood lacquer construction in high temperature and high humidity weather, don't ignore the next one: Cabinet customization is not urgent
Lobe Pumps for Sizing starch in Paper Making
Lobe pumps mainly be used following positions in the paper making industry:
Preparation of starch glue and feeding and conveying of starch.----S.S. lobe pump
Coating preparation and coating feeding and transportation.----S.S. lobe pump
Chemical unloading and chemical addition.----S.S. lobe pump
Rotor pumps in paper making industry, Rotary lobe pumps for paper making, rotor pumps in paper making
NINGBO DURREX PUMPS CO.,LTD , https://www.durrexlobepump.com