Architectural Membrane

Model NO.: 11
Function: Waterproof
Certification: ISO, MSDS, CE
Color: Black
Usage: Roofs, Underground, etc
Length: 10m
Width: 1m
Surface: PE, Sand, Mineral.Aluminum
Trademark: hongyuan
Specification: 3.0/4.0/5.0mm*1m*10m
Origin: Weifang China
HS Code: 68071

Product Description
1. Construction waterproofing membrane
2. Bitumen membrane, anti-corrosion.
3. Many kinds of surfaces.
4. Torched applied.
 
Introduction

SBS(Styrene Butadiene Styrene) /APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as SBS, APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.
 
HONGYUAN ranks TOP 3 in China waterproofing industry.
 
Specification

Thickness 3mm, 4mm, 5mm
Width 1m
length 10m, or on demand
Base Polyester felt
Surface PE film, Aluminum foil, Yellow sand, Shale gravel(Schist), Colored sand
Notice SBS modified bitumen membrane is specially applied in the cold district,
APP modified bitumen membrane is more suitable for hot district with high temperature.
Note Self adhesive type
Thickness: 1.2mm, 1.5mm, 2mm, 3mm, 4mm;  With or without polyester felt
Surface: PE film, Aluminium foil, Double-sided adhesive
Certificate   ISO 9001/14001
 
Applications
 
1.Roof and underground in industrial and civil buildings;
2.Bridge, subway, tunnel, swimming pool, etc.
3.Waste landfill, sewage plant, irrigation system, etc.
4.Make sure the roof deck smooth, and dry (moisture<9%), then apply the surface or roof deck homogeneously with a kind bitumen paint, till dry to start application.
There are two methods in application:
5. One way is by heating and melting method. Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing), then install the membrane filly bonded to the roof deck with overlaps of 5-10cm.
6. The other way is by cold adhesive method. Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully slicked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.
After application, a full serious inspection is required to sure no air bubble, no falling away, etc.  to guarantee the waterproof life.
 
Storage:

Storage and transportation, the different types and specifications of the products should be stacked separately and should not be mixed. The storage temperature should not be higher than 50 ° C, stand up storage height of not more than two layers;
Storage and transport of different types and specifications of products should be stacked separately and should not be mixed. The storage temperature should not be higher than 50 ° C, stand up storage height of not more than two layers;
Normal storage conditions of transport, storage from the period from the date of production for one year.
 
 
Characteristics:
 
1) Good waterproof performance;
2) High tensile and tearing strength, elongation and size stability which accommodates substrate movement and deformation;
3) Anti-corrosion, mildew resistant and weather resistant;
4) Anti-puncture and rooting resistant, fatigue resistant;
5) Hot melt construction, solid and long-lasting;
6) Modified bitumen membrane is specially applied in the cold area. while APP modified bitumen membrane is more suitable for hot district with high temperature.
 
 
Technical Data Sheet
NO. Item I II
PY G PY G PYG
1 Content of soluble/(g/sq m) 3mm 2100 *
4mm 2900 *
5mm 3500
Test phenomenon * nonflammable * Nonflammable *
2 heat resistance degree 110 130
≥mm 2
Test phenomenon No flow drip
3 Low temperature Flexibility/degree -7 -15
No cracks
4 Impermeability(30min) 0.3Mpa 0.2Mpa 0.3Mpa
5 Tension Maximum tension/(N/50mm) 500 350 800 500 900
Second high tension/(N/50mm) * * * * 800
Test phenomenon While pulling, bitumen will not crack or separate with the felt
6 elongation Maximum elongation 25 * 40 * *
Second high elongation * * 15
7 Permeability oily Quantity≤ 2

 Corner tub is designed to make your small bathroom looked deluxe. If you only have a small bathroom, but you still want to take a shower and bath, then you can decide to put a corner tub with shower screen on it. There are so many shapes, also include European code and standard tubs --- L shaped and P shaped tubs. Using corner tub to enjoy your bathe time even it is a small bathroom.

Corner Tubs

L Shaped Bath Tub,Corner Tub With Screen,Corner Tubs,P Shaped Baths

Ningbo Waltmal Sanitary Wares Co., Ltd. ,

This entry was posted in on